- Brand: thompsons
- Manufactuer: thompsons
Thompson’s Stain Block Damp Seal 250ml is a high-performance interior paint designed to permanently block and seal stubborn stains caused by damp, water leaks, smoke, grease, and nicotine. Its advanced formula creates a protective barrier that prevents stains from bleeding through paint or wallpaper, helping restore walls and ceilings to a clean, uniform finish. Easy to apply with a brush or roller, it dries quickly to provide a tough, matt white coating that prepares surfaces for overpainting with most decorative paints. Ideal for kitchens, bathrooms, and other moisture-prone areas, it’s a reliable solution for tackling unsightly marks and maintaining a fresh-looking home.
Thompson’s Stain Block Damp Seal 250ml is a specialist interior paint designed to permanently block and seal damp stains on walls and ceilings before decorating. Its advanced stain-blocking formula prevents unsightly marks caused by water, smoke, nicotine, grease, and rust from bleeding through paint or wallpaper. The quick-drying coating creates a tough barrier that isolates stains and prepares surfaces for finishing coats, helping to achieve a clean, even appearance. Ideal for use on plaster, cement, stone, and previously painted surfaces, this compact 250ml tin is perfect for treating smaller problem areas around the home.
Application and limitations:
Thompson’s Stain Block Damp Seal 250ml is an aerosol primer designed to seal and cover interior stains such as damp marks, water stains, smoke damage, grease, and pen or crayon marks on surfaces like plaster, cement, stone, brick, and previously painted walls or ceilings. It is typically applied as a quick-drying base coat before repainting, helping prevent stains from bleeding through the final paint layer. The surface should be clean, dry, and free from loose material before spraying, and the product is usually applied in light, even coats from a short distance. However, it is important to note that this product does not treat or stop the source of damp, and it should not be used on persistently wet surfaces or areas with active water ingress. It is also not suitable for exterior use or as a finishing paint, and proper ventilation is required during application due to its solvent-based aerosol formulation.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.11 inc. VAT
£2.59 ex. VAT
-
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.92 inc. VAT
£2.43 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£9.90 inc. VAT
£8.25 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit






Reviews
There are no reviews yet.