- Suitable For: bonding cork based materials
- Area of use: INT
- Application Method: trowel
- Time to full cure: 12 hours
- Volume: 1KG, 5KG
- Container Type: tub
- Type: adhesive
- Colour: brown
- Brand: Soudal
- Manufactuer: Soudal
- Box Size: 1
Data Sheets
Soudal Cork Adhesive is a solvent free adhesive paste for various cork based materials (tiles, Rolls, sheets) for bonding applications onto porous surfaces (concrete, cementitious surfaces, stone, plaster, wood, chipboard etc).
Properties
– Ready for use paste
– High adhesive strength
– Flexible
– Water resistant
– Not flammable
Substrates
Substrates: stone, concrete, stucco, wood
Nature: flat, clean, dry, free of dust and grease.
Surface preparation: On very absorbent surfaces the surface should be treated with a primer.
We recommend a preliminary adhesion test on any substrate.
For more in our range of adhesives, please click here, or for more products from Soudal, click here.
Alternatively, you can visit Soudals website by clicking here.
Soudal Cork Adhesive is suitable for bonding cork based materials (tiles, rolls, sheets). Since this is a water based product, apply on porous surfaces (e.g., concrete, cementitious surfaces, stone, plaster, wood, chipboard, etc.)
APPLICATION
Application method: Apply the adhesive by means of a notched trowel (3-5 mm) to the surface. Do not apply more adhesive to the surface as can be covered within’ 10 min. Roll or press cork very well. After approx. 10 min press or roll edges firmly.
Cleaning: 22A Cork Adhesive may be removed from tools and cork with water. Cured 22A Cork Adhesive can only be removed mechanically.
Repair: With the same material.
LIMITATIONS
– Remove the cork tiles from their packaging at least 24 hours before installation to allow the tiles to acclimatize.
– Minimum temperature of the substrate should be at least 15°C.
– Never install on a subfloor with too high moisture content.
– After minimum 48 hours, the cork can be further treated (varnished).
– First check with your cork supplier if the pre-paints tiles can be bonded with a water based adhesive. If this is not the case, please use Soudal Contact Adhesive 44A.
– Do not dilute the adhesive.
8 reviews for Soudal Yellow – Cork Adhesive
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.56 inc. VAT
£2.97 ex. VAT
From: £64.84 inc. VAT
£54.03 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Eric (verified owner) –
Great service and prompt delivery.
Martin G. (verified owner) –
I was very pleased with how my order arrived. It arrived very promptly and the price was very fair too.
Anonymous (verified owner) –
Sticks the tiles to the wall easily.
Paula (verified owner) –
So far it’s good it does the job. Easy to apply
J GRANT (verified owner) –
I am so impressed with this product. It has sealed the floor perfectly with very little mess. I used it on a small WC that has concrete floor. The measurements and pot portions size were exact. I will definitely recommend this cork sealant
Alan S. (verified owner) –
Did what it said on the tin…. which is all we all want!
Marrilyn W. (verified owner) –
Efficient ordering and delivery. Haven’t actually used the product yet.
Tam (verified owner) –
Really happy with this product. Used on cork floor tiles adhered to concrete. It was easy to use, didn’t smell much and was easy to apply.