Sika Sikadur 31+ (AB)
From: £38.16 inc. VAT
£31.80 ex. VAT
- Suitable For: Low-VOC epoxy adhesive for structural bonding and concrete repair
- Area of use: INT & EXT
- Volume: 1.2KG / 6KG
- Container Type: Tub
- Type: Adhesive
- Brand: SIKA
- Manufactuer: SIKA
Sikadur®-31+ is a two-part, low-VOC, moisture-tolerant epoxy structural adhesive designed for strong bonding to a wide range of construction materials and for use in structural concrete repair, joint filling, and crack sealing in both DIY and professional applications. It offers excellent adhesion to dry and damp concrete, high mechanical strength, and thixotropic, non-sag properties for vertical and overhead work, while requiring no primer. The product is easy to mix, features colour-coded components for control, resists abrasion and specific chemicals, remains impermeable to most liquids and vapour, hardens without shrinkage, and can be applied in layers up to 30 mm within a temperature range of +10 °C to +30 °C.
Key Points
– Strong, moisture-tolerant epoxy adhesive suitable for structural concrete repair (Class R4, EN 1504-3).
– Excellent adhesion, high mechanical strength, and non-sag performance on vertical and overhead surfaces.
– No primer needed; resists abrasion, chemicals, and moisture, with low VOC certification (EC1PLUS).
– Easy mixing with colour-coded components; shrink-free curing and application up to 30 mm thick.
Shelf Life
The product has a shelf life of 24 months from the date of production.
Storage Conditions
Store in its original, unopened and undamaged sealed packaging, in dry conditions, at temperatures between +5 °C and +30 °C. Always follow the storage guidance on the packaging. Refer to the current Safety Data Sheet for full details on safe handling and storage
For more in our range of adhesives, please click here. For our full range of products from Sika, please click here.
For more information on Sika and their products, you can visit their website here
The Product is used as a structural adhesive for concrete repair and strengthening, including repairing spalled or damaged concrete (EN 1504-9, Principle 3, Method 3.1), bonding plate reinforcement (Principle 4, Method 4.3), and increasing load-bearing capacity by adding mortar (Principle 4, Method 4.4).
Sikadur 31 is used for bonding the following materials:
▪ Concrete. ▪ Natural stone. ▪ Ceramics. ▪ Fibre cement. ▪ Mortar. ▪ Brick masonry. ▪ Brick slips. ▪ Steel. ▪ Iron. ▪ Wood.
Sikadur 31 is used for repairing and reprofiling:
▪ Structural concrete elements such as beams, columns, and walls. ▪ Non-structural concrete elements. ▪ Small patches and edges.
Sikadur 31 is used for filling and sealing:
▪ Joint arises. ▪ Crack arises. ▪ Non-structural static cracks. ▪ Holes. ▪ Voids.
ECOLOGY, HEALTH AND SAFETY
Users must consult the most recent Safety Data Sheets (SDS) before using any products. The SDS provides guidance on safe handling, storage, and disposal of chemical products, along with physical, ecological, toxicological, and other safety-related information.
APPLICATION INSTRUCTIONS
SUBSTRATE QUALITY
CONCRETE, MASONRY, MORTAR, STONE
Concrete and mortar must be at least 28 days old. Substrates should be sound, clean, and either dry or matt damp, but free from standing water. All surfaces must be free of contaminants such as ice, dirt, oil, grease, coatings, laitance, efflorescence, surface treatments, and loose friable material.
STEEL
Steel surfaces must be sound, clean, dry, and free from dirt, oil, grease, coatings, and loose material.
WOOD
Wood surfaces must be sound, clean, dry, and free from dirt, oil, grease, coatings, and loose material.
SUBSTRATE PREPARATION
IMPORTANT – Reduced adhesion due to surface contamination
Surface contaminants such as dust and loose material, including residues generated during preparation, can reduce product performance. Thoroughly clean all surfaces using a vacuum or appropriate dust removal equipment before application.
CONCRETE, MASONRY, MORTAR, OR STONE
Prepare the substrate mechanically using suitable techniques to achieve an open-textured, gripping surface profile. Suitable methods include:
Abrasive blast cleaning
Needle gunning
Light scabbling
Bush hammering
Grinding
STEEL
Prepare mechanically to ensure a bright metal finish with a surface profile that meets the required tensile adhesion strength. Suitable methods include:
Abrasive blast cleaning
Rotating wire brush
Grinding
WOOD
Prepare the surface by planing, sanding, or other appropriate methods.
MIXING
IMPORTANT – Poor workability due to incorrect mixing
Do not mix a new unit until the previous one has been used.
PRE-BATCHED UNITS
Mix part A (resin) briefly using a slow-speed mixer (max. 300 rpm).
Add part A to part B (hardener) and mix continuously for at least 3 minutes until smooth and uniformly coloured.
Pour into a clean container and mix again for approximately 1 minute. Total mixing time for A+B = 4 minutes.
Do not overmix.
APPLICATION
IMPORTANT – Damage due to unsupported heavy components
Full adhesion is only achieved once the product has fully hardened. Unsupported heavy components may fall before hardening. Provide temporary support for heavy components until the product is fully set.
BONDING
Confirm dew point conditions before and during application.
On damp prepared concrete, always apply by brush and work the product into the substrate. Apply the mixed adhesive with a spatula, trowel, notched trowel, or gloved hand.
For optimum adhesion, apply adhesive to both surfaces.
Provide temporary support for vertical or overhead heavy components until fully hardened.
REPAIR
Confirm dew point conditions before and during application.
Place temporary formwork if required.
On damp prepared concrete, apply by brush and work the product into the substrate. Apply with a spatula, trowel, or gloved hand.
For repairs over 30 mm deep, apply in layers. Roughen the intermediate layer to improve adhesion of subsequent layers.
Apply each subsequent layer once the previous has hardened.
If more than 2 days will pass between layers, blind the wet adhesive with quartz sand immediately after application.
JOINT FILLING AND CRACK SEALING
Apply the mixed adhesive to prepared surfaces with a spatula or trowel.
CLEANING OF TOOLS
Clean all tools and equipment immediately after use with Sika® Thinner C. Hardened material can only be removed mechanically.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m | up to 2,5 m | up to 3,5 m | up to 4,5 m | up to 2,5 m | up to 3,5 m | up to 4,5 m | |
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm | Minimum witdth of joints for a inner mounting b in mm | |||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) | 15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.28 inc. VAT
£2.73 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £2.64 inc. VAT
£2.20 ex. VAT
From: £13.14 inc. VAT
£10.95 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £6.64 inc. VAT
£5.53 ex. VAT
From: £2.72 inc. VAT
£2.27 ex. VAT
From: £8.38 inc. VAT
£6.98 ex. VAT
From: £2.35 inc. VAT
£1.96 ex. VAT
From: £9.54 inc. VAT
£7.95 ex. VAT
From: £7.85 inc. VAT
£6.54 ex. VAT
From: £4.09 inc. VAT
£3.41 ex. VAT
From: £38.16 inc. VAT
£31.80 ex. VAT
£2.87£2.26 inc. VAT£2.39£1.88 ex. VATBond It MM50 is a mid mod, acetoxy cure, sanitary grade silicone sealant containing a powerful anti‐fungal compound to resist mould growth. A one part silicone sealant specifically designed for areas which are prone to high humidity or frequent wetting. For sealing around worktops, basins, sinks, bed basins to vanity units and also to seal shower trays and shower units. Features & Benefits: - Permanently Flexible - Mould Resistant - Contains powerful fungicide - Waterproof - For Internal Use - High Viscosity Formula - Tools Quickly For seal£2.87£2.26 inc. VAT£2.39£1.88 ex. VATBond It MM50 is a mid mod, acetoxy cure, sanitary grade silicone sealant containing a powerful anti‐fungal compound to resist mould growth. A one part silicone sealant specifically designed for areas which are prone to high humidity or frequent wetting. For sealing around worktops, basins, sinks, bed basins to vanity units and also to seal shower trays and shower units. Features & Benefits: - Permanently Flexible - Mould Resistant - Contains powerful fungicide - Waterproof - For Internal Use - High Viscosity Formula - Tools Quickly For seal
£23.04£18.11 inc. VAT£19.20£15.09 ex. VATBond It Trowel Mastic can be applied to most common roofing surfaces including mastic asphalt, roofing felt, corrugated iron, cast iron, fibre/cement, slates, lead, copper, zinc, concrete and timber. Fibre reinforced making it ideal for filling cracks and holes and cures to give a strong and flexible compound. Storage LifeMinimum of 5 years from date of manufacture under good storage conditions in original unopened containers. Store under cover away from sources of heat and ignition. Keep containers sealed when not in use. For all other Bond-it
£3.47 inc. VAT
£2.89 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here.For any further information, you may need on Bond-it, please visit their website here.
Reviews
There are no reviews yet.