Everbuild Everflex Silicone Eater 100ml
£6.71 inc. VAT
£5.59 ex. VAT
In Stock
- Product ID: SILEAT
- Suitable For: use on aluminium and its alloys, copper and its alloys, iron, steels, glass, ceramics, epoxy composites, most plastics.
- Area of use: INT & EXT
- Application Method: silicone gun
- Volume: 100ml
- Container Type: cartridge
- Type: remover
- Brand: Everbuild
- Manufactuer: Everbuild
- Box Size: 1
Everbuild Everflex Silicone Eater is specifically designed to remove all silicone based sealants and surface water repellents – cured and uncured. The product acts by denaturing silicone polymers, making them easily water or solvent cleanable.
Advantages
– Readily denatures silicone.
– May be used vertically as well as horizontally.
– Water clean-up.
For all other cleaners on our website, please click here. For tools, please click here.
For any further information on Everbuild’s products, please visit their website here.
– May be used on aluminium* and its alloys, copper and its alloys, iron, steels, glass, ceramics, epoxy composites, most plastics.
– Has very little effect on rubber and other elastomers.
– Everbuild Everflex Silicone Eater has little impact on most painted surfaces.
APPLICATION
SUBSTRATE PREPARATION
All surfaces must be dust free. Cut as much as possible away from the silicone sealant using a sharp knife. Protect surrounding areas with impervious masking tape.
APPLICATION METHOD / TOOLS
Cut the tip of the cartridge with a sharp blade, or try the Bond It Snip Off Tool, taking care not to damage the thread. Apply using a standard sealant gun.
– Removing Silicone sealants from baths/showers:
Spread the bead over the entire area which requires treatment (use masking tape to protect surrounding areas). Apply an amount that is at least twice the thickness of the underlying silicone. After that, repeat application if necessary. Wash off with water after 4 hours maximum.
Note: The product specifically removes silicone products. It may have a lesser effect on acrylics, GP mastics and butyl sealant.
Apply as in (a) to window panes, frames sills etc. and allow a dwell time of 10 minutes. Wash off with white spirits or water. Repeat if necessary.
LIMITATIONS
*TEST A SMALL AREA BEFORE USE. In all cases, apply a small test patch to an inconspicuous area. Leave for 2 hours min and rinse off. Check for staining/corrosion before attempting the whole job.
In addition, this product may attack nylon, certain fabrics/textiles and coloured anodised aluminium, PU coated baths & chipped surfaces.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £3.56 inc. VAT
£2.97 ex. VAT
From:
From: £11.34 inc. VAT
£9.45 ex. VAT
From:
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £4.36 inc. VAT
£3.63 ex. VAT
£12.38 inc. VAT
£10.32 ex. VAT
£4.86 inc. VAT
£4.05 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT
£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.