- Area of use: EXT & INT
- Volume: 700ml
- Container Type: aerosol
- Colour: black, blue, red , white, yellow
- Brand: everbuild
- Manufactuer: sika
Sika Everbuild Survey Line spray marking paint is designed for contractors and surveyors for clear, colour-coded spot marking on a variety of surfaces. Suitable for identifying electric, gas, water, and cable lines, the semi-permanent formula provides high covering power and remains visible for at least three months after application. It can be applied easily by hand or with a marking applicator.
Key Points:
– High-opacity formula for clear and visible markings
– Semi-permanent finish lasts a minimum of 3 months
– Adheres to most common surfaces
– Suitable for hand application or use with an applicator
Shelf Life – 12 months from date of manufacture.
Storage Conditions – Store in cool, dry conditions, between 5 and 25°C. PROTECT FROM FROST.
For our full range of products from Sika, please click here.
For more information on Sika and their products, you can visit their website here
Suitable for:
– Marking cable positions prior to drilling/cutting.
– Turf marking and landscaping use.
– Excavation and mining.
– Highlighting holes, machine positions, fixing positions.
Colour Code:
– White/Yellow / Orange – General Marker
– Blue – Water
– Red – Electricity
– Green – Cablework
– Black – Covering old lines
APPLICATION
– Designed for inverted use only
– Shake the can vigorously for 2–3 minutes after the mixing balls begin to rattle
– For hand application, remove the cap, turn the can upside down, and pull the nozzle towards the can using two fingers
– Keep the nozzle clear during pauses in use
– After use, turn the can upright, point the nozzle away from the user, and spray for 1–2 seconds to clear the nozzle
LIMITATIONS
– Do not apply if rain is expected within 2 hours of application
– Users are responsible for determining product suitability for their intended use; contact technical services for advice if required
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.39 inc. VAT
£6.99 ex. VAT
-
£3.59 inc. VAT
£2.99 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£3.24 inc. VAT
£2.70 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£3.56£2.80 inc. VAT£2.97£2.33 ex. VATA fast-acting, solvent-free cream cleaner designed to remove dirt and stains from PVCu and bathroom surfaces. Leaves a deep, polished finish and is safe for both interior and exterior use. -
£8.30 inc. VAT
£6.92 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages -Â Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple





























Reviews
There are no reviews yet.