Bond It Drive Alive Clear Coat Block Sealer 4 Litres

Bond It Clear Coat Block Sealer is designed to protect from your paving from:

• Water penetration
• Oil or grease spillages
• Dirt/grime build-up. 

It will enhance colour and extend the lifespan of the treated surface. Designed for use with cobble lock block paving only.

APPLICATION
Clear Coat Block Sealer is a ready to use product. We advise that you test this on a small area prior to use. Ensure surfaces are completely dry.
Apply a single coat using a brush, roller or squeegee,
ensuring there isn’t any pooling or ponding. Allow 3-4hrs drying
time before trafficking.

LIMITATIONS
Do not apply to wet/damp surfaces or in high humidity. Surfaces should be allowed to dry for 48 hours prior to application. Do not use if rain is
imminent. Keep children and animals away and whilst using and do not
traffic until fully cured. Do not allow any run off to
contaminate drains, waterways or plants.