CLEARANCE – ARBO Arbosil 1070 Fire Resistant Silicone GREY 380ml

10 Available

£1.19 inc. VAT
£0.99 ex. VAT

In Stock

Checkout
  • Suitable For: fire sealing
  • Area of use: INT & EXT
  • Application Method: silicone gun
  • Volume: 380ml
  • Container Type: cartridge
  • Type: sealant
  • Colour: grey
  • Brand: ARBO
  • Manufactuer: ARBO
  • Box Size: 25

 

ARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material.

 

 

 

For more information on Arbo, please visit their website here.

For more in our range of sealants, please click here. For application guns to use with this product, please click here.

 

 

ARBO Arbosil 1070 is suitable for:

• Sealing the perimeters of fire doors and screens.
• Exceptional fire resistance with high movement capability, ensuring 4 hours of fire integrity.
• Utilizing fire-retardant glazing in combination with Arboseal intumescent tape.

 

APPLICATION

Step 1 – Surface Preparation: Ensure that the surfaces are clean, dry, in good condition, and free from any contaminants. Note that the presence of soap or residue can hinder the adhesion of the silicone.

Step 2 – Surface Readiness: For gaps measuring 6mm or wider, insert a closed-cell Polyethylene foam backer rod, ideally 25% larger than the gap to allow for a minimum seal depth of 10mm. If needed, use masking tape around the perimeter to facilitate easy removal of excess silicone after application.

Step 3 – Loading the Caulking Gun: Insert the ARBO 1070 sealant cartridge into the skeleton gun. Use a sharp blade to snip the nozzle at a 45-degree angle, ensuring a clean cut without ragged edges. Avoid cutting the nozzle too large, as this can lead to difficulty and messiness during application.

Step 4 – Applying the Sealant: Squeeze the gun trigger to produce a smooth, even bead of silicone. Adjust your application speed to ensure a uniform bead. Be mindful not to use excessive silicone, as it will naturally spread when smoothed.

Step 6 – Smoothing and Final Touches: Dampen the silicone smoothers and tools to achieve the desired shape, correcting any mistakes made during the initial application. This is also the time to remove any masking tape used.

LIMITATIONS

• Cannot be overpainted.
• Not suitable for use on laminated glass.
• Not suitable for use on natural stone.

 

Reviews

There are no reviews yet.

Be the first to review “CLEARANCE – ARBO Arbosil 1070 Fire Resistant Silicone GREY 380ml”

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10
From: £9.54 inc. VAT
£7.95 ex. VAT
From: £9.54 inc. VAT
£7.95 ex. VAT
From: £6.00 inc. VAT
£5.00 ex. VAT
From: £6.00 inc. VAT
£5.00 ex. VAT
From: £3.83 inc. VAT
£3.19 ex. VAT
From: £3.83 inc. VAT
£3.19 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £2.65 inc. VAT
£2.21 ex. VAT
From: £2.65 inc. VAT
£2.21 ex. VAT
From: £20.23 inc. VAT
£16.86 ex. VAT
From: £20.23 inc. VAT
£16.86 ex. VAT
From: £24.76 inc. VAT
£20.63 ex. VAT
From: £24.76 inc. VAT
£20.63 ex. VAT
£3.19 inc. VAT
£2.66 ex. VAT
£3.19 inc. VAT
£2.66 ex. VAT
£5.09 inc. VAT
£4.24 ex. VAT
£5.09 inc. VAT
£4.24 ex. VAT
£13.24 inc. VAT
£11.03 ex. VAT
£13.24 inc. VAT
£11.03 ex. VAT
£198.00 inc. VAT
£165.00 ex. VAT
£198.00 inc. VAT
£165.00 ex. VAT
£2.46 inc. VAT
£2.05 ex. VAT
  • From: £20.23 inc. VAT
    £16.86 ex. VAT
    From: £20.23 inc. VAT
    £16.86 ex. VAT
      Bond It Colour Enhancer is designed to enhance coloured concrete and block paving and protect from water penetration, oil or grease spillages and dirt/grime build-up. It will enhance the present colour and extend the lifespan of the treated surface. A ready-to-use, coloured solution for use on concrete, block paving, paving slabs, walling and roof tiles. Restores colour Reduces water penetration, staining and dirt/grime build-up UV stable formulation Helps inhibit organic growth Solvent-free formulation – low odour Facilitates easier cleaning Improves water r
  • From: £24.76 inc. VAT
    £20.63 ex. VAT
    From: £24.76 inc. VAT
    £20.63 ex. VAT
      Bond It Geo-Fix All Weather is a single component joint filling system for the simple and rapid pointing of paved areas with joints over 5mm. Ready-to-use, simple brush application. Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather.   Features & Benefits: - Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather - Can be used on joint widths of a minimum of 5 mm wide and a minimum of 15 mm deep. Semi‐rigid allowing for expansion and contraction of paving - GEO‐FIX All Weather is unaffected by w
  • £37.01 inc. VAT
    £30.84 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.
  • £70.80 inc. VAT
    £59.00 ex. VAT
    £70.80 inc. VAT
    £59.00 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.