Cromar Alpha Chem Boardfix FR 750ml

£8.52 inc. VAT
£7.10 ex. VAT

Checkout
  • Product ID: X5BOARD7
  • Suitable For: bonding various construction materials including plasterboard
  • Area of use: INT
  • Application Method: foam gun
  • Time to full cure: 30 mins
  • Volume: 750ml
  • Container Type: can
  • Type: adhesive foam
  • Colour: pale pink
  • Brand: Cromar
  • Manufactuer: Cromar
  • Box Size: 1

 

AlphaChem Boardfix FR stands as a high-performance adhesive foam in gun grade, offering a swift and efficient approach to bonding diverse construction materials, plasterboard being one of them. Its rapid adhesive action enables plastering and wall plugging to commence within a mere hour.

Comparatively more cost-effective and lighter in composition than plaster, it brings an added layer of ease to usage and application. Notably, Boardfix holds a B3 fire rating, assuring non-combustibility.

 

For more in our range of Foams, please click here. For more in our range from Cromar, click here.

Alternatively, to visit Cromar’s website, please click here.

 

 

Alpha Chem Boardfix FR is suitable for:

  • Excellently suited for affixing heat insulation panels and addressing gaps while applying adhesive.
  • Recommended for bonding wooden construction materials to surfaces like concrete and metal.
  • Ideal for scenarios requiring controlled expansion.
  • Well-suited for attaching and isolating window and door frames.

Additionally, it’s worth noting that this product is environmentally responsible, devoid of any propellant gases detrimental to the ozone layer.

 

APPLICATION

  • Ensure all surfaces are thoroughly cleaned, stable, dry, and devoid of dust, grease, or contaminants. If the surface isn’t clean, pressurized water can be used to remove dust.
  • The recommended can temperature is +20°C.
  • Application is viable within a temperature range of +5°C to +35°C.
  • Vigorously shake the can before use, around 30 times. Repeat shaking at intervals.
  • Attach the can to an AlphaChem foam applicator gun. The foam output can be managed using the trigger and adjusted with the screw on the gun’s rear side.
  • For foam application, invert the can and press the trigger. Maintain control over foam output through the trigger and adjustment screw. Always keep the can upside down during application.
  • Apply the foam around the board’s perimeter and then approximately every 40cm. Allow it to stand for 3-4 minutes before pressing the board against the wall. Apply even pressure across the board’s entire surface and hold it in place for roughly 1 minute. Corrections can be made within 15-20 minutes if needed. Complete curing takes around 2-3 hours.
  • Fresh foam can be cleaned using AlphaChem Foam Cleaner. Mechanically cleaning is recommended for cured foam.

LIMITATIONS

  • Storage outside the temperature range of +5°C to +25°C affects shelf life, also impacting foam yield and curing time due to colder temperatures.
  • Proper storage and transportation involve keeping the product in a vertical position.
  • To achieve optimal results, maintain the product at room temperature for at least 12 hours before application.
  • Cured foam may undergo discoloration upon exposure to ultraviolet light.
  • For enhanced performance in outdoor applications, consider painting or coating the cured foam.
  • The user bears the responsibility of ensuring the product’s suitability for their intended use.
  • Carefully review the label before usage; it contains crucial health and safety information. Additional details are available in the Safety Data Sheet, which can be requested.

 

Reviews

There are no reviews yet.

Be the first to review “Cromar Alpha Chem Boardfix FR 750ml”

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10
From: £9.54 inc. VAT
£7.95 ex. VAT
From: £9.54 inc. VAT
£7.95 ex. VAT
From: £6.00 inc. VAT
£5.00 ex. VAT
From: £6.00 inc. VAT
£5.00 ex. VAT
From: £3.83 inc. VAT
£3.19 ex. VAT
From: £3.83 inc. VAT
£3.19 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £2.65 inc. VAT
£2.21 ex. VAT
From: £2.65 inc. VAT
£2.21 ex. VAT
From: £20.23 inc. VAT
£16.86 ex. VAT
From: £20.23 inc. VAT
£16.86 ex. VAT
From: £24.76 inc. VAT
£20.63 ex. VAT
From: £24.76 inc. VAT
£20.63 ex. VAT
£3.19 inc. VAT
£2.66 ex. VAT
£3.19 inc. VAT
£2.66 ex. VAT
£5.09 inc. VAT
£4.24 ex. VAT
£5.09 inc. VAT
£4.24 ex. VAT
£13.24 inc. VAT
£11.03 ex. VAT
£13.24 inc. VAT
£11.03 ex. VAT
£198.00 inc. VAT
£165.00 ex. VAT
£198.00 inc. VAT
£165.00 ex. VAT
£2.46 inc. VAT
£2.05 ex. VAT
  • From: £20.23 inc. VAT
    £16.86 ex. VAT
    From: £20.23 inc. VAT
    £16.86 ex. VAT
      Bond It Colour Enhancer is designed to enhance coloured concrete and block paving and protect from water penetration, oil or grease spillages and dirt/grime build-up. It will enhance the present colour and extend the lifespan of the treated surface. A ready-to-use, coloured solution for use on concrete, block paving, paving slabs, walling and roof tiles. Restores colour Reduces water penetration, staining and dirt/grime build-up UV stable formulation Helps inhibit organic growth Solvent-free formulation – low odour Facilitates easier cleaning Improves water r
  • From: £24.76 inc. VAT
    £20.63 ex. VAT
    From: £24.76 inc. VAT
    £20.63 ex. VAT
      Bond It Geo-Fix All Weather is a single component joint filling system for the simple and rapid pointing of paved areas with joints over 5mm. Ready-to-use, simple brush application. Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather.   Features & Benefits: - Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather - Can be used on joint widths of a minimum of 5 mm wide and a minimum of 15 mm deep. Semi‐rigid allowing for expansion and contraction of paving - GEO‐FIX All Weather is unaffected by w
  • £37.01 inc. VAT
    £30.84 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.
  • £70.80 inc. VAT
    £59.00 ex. VAT
    £70.80 inc. VAT
    £59.00 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.