- Product ID: 117498
- Suitable For: maximising adhesion on a range of non-porous substrates such as plastics, metals, ceramic screen prints and painted surfaces.
- Area of use: INT & EXT
- Volume: 1LTR
- Container Type: bottle
- Type: activator
- Brand: Sika
- Manufactuer: Sika
- Box Size: 1
Data Sheets
Sika Aktivator 205 is a 1 part liquid, that is used to maximise adhesion on a range of non-porous substrates such as plastics, metals, ceramic screen prints and painted surfaces.
Primer Product Benefits
-
- Enhanced adhesion on various substrates
- Short flash-off time
- Easy to use
- Transparent
Advantages
- Improved adhesion on multiple substrates
- Short flash-off time
- Easy to use
- Transparent
We also supply & stock a wide range of Sika products on our website.
For any further information, you may need, please visit the Sika website.
Sika Aktivator 205 is a 1 part liquid, that is used to maximise adhesion on a range of non-porous substrates such as plastics, metals, ceramic screen prints and painted surfaces. The manufacturer advises a performance test on original substrates prior to using Sika Aktivator-205 on materials liable to suffer stress cracking. It is recommended that this product should only be used by an experienced professional.
APPLICATION
Areas must be dry, clean and free from grease, oil, dust and any other contaminants. Adhesion on substrates may be improved by adding and/or combining pre-treatment processes such as scuffing and cleaning before Sika aktivator 205 is applied.
Primer
Wipe bond surfaces with a clean, lint-free paper towel moistened (not wet) with Sika® Aktivator-205. Never dip the towel into the activator. Only wipe the surface with a fresh towel. Do not wet the same paper towel twice and be sure to change it frequently.
Sika Aktivator 205 has to be applied sparingly as an excess of activator could lead to failure of adhesion.
If a pre-treated area is not bonded within the maximum finish-off time, the activation process has to be repeated (once only).
Typical application and surface temperature are between 15 °C and 25 °C.
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.56 inc. VAT
£2.97 ex. VAT
From: £47.33 inc. VAT
£39.44 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.