Soudal Soudafoam Gap Filler Genius 600ml

Ideal for general filling and insulating of holes, voids, gaps and joints in most construction applications. Adheres to most building materials. Can also be used around window and door frames. Insulation of pipes etc.

APPLICATION

Shake the aerosol can for at least 20 seconds. Open the cover and fold the tube horizontally. The surface should be free from grease and dust. Moisten surfaces with a water sprayer before application. For non-conventional substrates, a preliminary adhesion test is recommended. Fill holes and cavities for 1/3, as the foam will expand. Repeat shaking regularly during application. If you have to work in layers, repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foamcleaner or acetone. Cured foam can only be removed mechanically or with Soudal PU-Remover.For storage: detach the bung, close the nozzle with a bung, close the cap, and store the can upright. 

Can temperature: +5 °C – 30 °C 

Ambient temperature: +5 °C – 30 °C. 

Surface temperature: +5 °C – 35 °C 

Health and Safety Recommendations 

Take the usual labour hygiene into account. Always wear gloves and goggles. Remove cured foam mechanically. Never burn away. Consult label and material safety data sheet for more information. When vaporizing (for example, with a compressor), additional security measures will be required. Use only in well ventilated areas. 

LIMITATIONS 

– Slightly moistening of the surface in hollow spaces optimizes curing, good adhesion and yield.