Soudal Yellow – Parquet – Hybrid Polymer Adhesive


From: £10.08 inc. VAT
£8.40 ex. VAT

Checkout
  • Suitable For: use on porous and non-porous substrates such as mosaic, anhydrite, concrete, etc.
  • Area of use: INT
  • Application Method: trowel
  • Time to full cure: 24 hours
  • Volume: 1kg, 7kg, 15kg
  • Container Type: tub
  • Type: adhesive
  • Colour: light brown
  • Brand: Soudal
  • Manufactuer: Soudal
  • Box Size: 1

 

Soudal Parquet Hybrid Polymer is a universally applicable water-free polymer for gluing multi-layered and solid parquet floor with tongue and groove. Also suitable for gluing exotic woods.

 

Properties
– Flexible
– EC-1 Plus label: very low emission
– 1-component system ready for use
– Solvent free
– Contains no water
– Free of isocyanate
– Easy application
– Suitable for underfloor heating

 

Substrates
Nature: SMX Parquet adhesive should be applied on a rigid, clean, permanently dry, dust and grease free surface which do not contain any loose parts, paint, wax, oil or other contaminants. Irregularities such as remaining concrete levelling, old adhesives may adversely affect adhesion. These need preferably to be removed mechanically for example by sanding or blasting. The top layer of anhydrite subfloors has to be removed.

Before installation of the parquet, the substrate should be checked to ensure it is suitable. Check the moisture content throughout the entire thickness of the substrate with a carbide or electric hygrometer. Note that an electric hygrometer only gives indicative values. The moisture content must correspond the recommendation of the floor manufacturer (generally max. 2% for sand cement substrates and max. 0,5% for anhydrite, measured with a carbide hygrometer. For substrates with underfloor heating the values are resp. max. 1,5% and 0,3%). We recommend a preliminary adhesion test on any substrate.

Please note, this is a non-stock item & extended lead times are advised

 

 

For more in our range of adhesives, please click here, or for more products from Soudal, click here.

Alternatively, you can visit Soudals website by clicking here.

 

 

Parquet Adhesive is suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard and OSB Board (large particle size chipboard), including floors with underfloor heating and cooling.

 

APPLICATION

SMX Parquet adhesive should be acclimatised to room temperature before installation. Apply the adhesive by means of Soudal notched trowel B11 to the surface. Do not apply more to the surface than can be covered with parquet within 30 minutes. Slide the parquet onto the adhesive layer and tap into place or tamp down with a rubber hammer. A minimum of 80% contact coverage is required to ensure the adhesion of ther parquet. If necessary load the parquet with weight. Wait at least 24 hours before sanding and finishing the parquet.

Cleaning: SMX Parquet adhesive can be removed before curing from tools and material with Soudal Adhesive Cleaner 90A, Swipex or white spirit. Cured SMX Parquet adhesive can only be removed mechanically.

 

LIMITATIONS

– Minimum temperature of the substrate should be at least 15°C.
– Do not apply the adhesive when the relative humidity is above 75%.
– Never install flooring on a substrate which contains too much moisture or on substrates with a higher humidity value than recommended by the wood supplier.
– Never install wood which is too dry (<7% humidity). It can expand at higher humidity and cause damage.
– Do not install if the walls and ceilings of the area are not dry (e.g. after plastering or painting etc.)
– Do not dilute the adhesive.
– Never apply on a substrate which is not protected against rising damp. If necessary apply a moisture sealer such as Soudal EPR-31P.

 

Reviews

There are no reviews yet.

Be the first to review “Soudal Yellow – Parquet – Hybrid Polymer Adhesive”

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10

From: £8.03 inc. VAT
£6.69 ex. VAT

From: £8.03 inc. VAT
£6.69 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £3.83 inc. VAT
£3.19 ex. VAT

From: £3.83 inc. VAT
£3.19 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £9.54£6.00 inc. VAT
£7.95£5.00 ex. VAT

From: £9.54£6.00 inc. VAT
£7.95£5.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £11.34 inc. VAT
£9.45 ex. VAT

From: £11.34 inc. VAT
£9.45 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £6.59 inc. VAT
£5.49 ex. VAT

From: £6.59 inc. VAT
£5.49 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £4.01 inc. VAT
£3.34 ex. VAT

From: £4.01 inc. VAT
£3.34 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £4.36 inc. VAT
£3.63 ex. VAT

From: £4.36 inc. VAT
£3.63 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £4.21 inc. VAT
£3.51 ex. VAT

From: £4.21 inc. VAT
£3.51 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

£11.48 inc. VAT
£9.57 ex. VAT

£11.48 inc. VAT
£9.57 ex. VAT

From: £115.20 inc. VAT
£96.00 ex. VAT

From: £115.20 inc. VAT
£96.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £217.20 inc. VAT
£181.00 ex. VAT

From: £217.20 inc. VAT
£181.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £146.40 inc. VAT
£122.00 ex. VAT

From: £146.40 inc. VAT
£122.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £78.00 inc. VAT
£65.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

  • £37.01 inc. VAT
    £30.84 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.

  • £70.80 inc. VAT
    £59.00 ex. VAT

    £70.80 inc. VAT
    £59.00 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.

  • £8.14£1.19 inc. VAT
    £6.78£0.99 ex. VAT
      ARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material.       For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here.  

  • £3.61£1.19 inc. VAT
    £3.01£0.99 ex. VAT

    £3.61£1.19 inc. VAT
    £3.01£0.99 ex. VAT
      Bond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer.   PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH   BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf