Soudal Silirub A 295ml – Box of 24


From: £77.76 inc. VAT
£64.80 ex. VAT

Checkout
  • Suitable For: joints in bathrooms and kitchens
  • Area of use: INT
  • Application Method: silicone gun
  • Time to full cure: 24 hours
  • Volume: 295ml
  • Container Type: cartridge
  • Type: sealant
  • Colour: 6 colours
  • Brand: Soudal
  • Manufactuer: Soudal
  • Box Size: 24
Data Sheets

Download Tech Data

 

Silirub A is a GENERAL PURPOSE acetoxy silicone sealant which is mould resistant. It has superb adhesion without the use of a primer on many common construction materials (glass, ceramic, porcelain, metals and wood), as well as being resistant to weathering, chemicals, and high and low temperatures.

 

Properties
– Very easy to apply
– Colourfast and UV resistant
– Impervious to mould
– Permanently elastic after curing
– Very good adhesion on many materials
– Typical acetic smell

 

 

For more products in our Soudal range, please click here. For application guns for this product, please click here.

Alternatively, for more information on Soudal, you can visit their website here.

 

 

Silirub A is ideal for the following applications:

– Joints in bathrooms and kitchens.
– Top sealing in glazing.
– Sealing in cold store rooms and container construction.
– Sealing in air conditioning systems.

 

APPLICATION

Application method: With manual- or pneumatic caulking gun.

Cleaning: Clean with White Spirit or Soudal Surface Cleaner immediately after use (before curing).

Finishing: With a soapy solution or Soudal Finishing Solution before skinning.

Repair: With the same material.

 

LIMITATIONS

– Because of the acid nature, certain metals (eg copper, lead) can be affected.
– Do not use on natural stones like marble, granite,…(staining). Use Soudal Silirub MA or Silirub+ S8800 for this application.
– Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.
– The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remaining’s will stimulate the development of fungi.
– A total absence of UV can cause a colour change of the sealant.
– In an acid environment or in a dark room, a white sealant can slightly turn yellow. Under the influence of sunlight it will turn back to its initial colour.
– When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution. This will cause the sealant not to adhere to that surface. Therefore we recommend to only dip the finishing tool in this solution.
– We strongly recommend not to apply the product in full sunlight as it will dry very fast.
– Do not use in applications where continuous water immersion is possible.
– Do not use on polycarbonate. Use Silirub PC instead.
– When using different reactive joint sealants, the first joint sealant must be completely hardened before the next one is applied.

 

Reviews

There are no reviews yet.

Be the first to review “Soudal Silirub A 295ml – Box of 24”

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10

From: £8.03 inc. VAT
£6.69 ex. VAT

From: £8.03 inc. VAT
£6.69 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £3.83 inc. VAT
£3.19 ex. VAT

From: £3.83 inc. VAT
£3.19 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £9.54£6.00 inc. VAT
£7.95£5.00 ex. VAT

From: £9.54£6.00 inc. VAT
£7.95£5.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £11.34 inc. VAT
£9.45 ex. VAT

From: £11.34 inc. VAT
£9.45 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £6.59 inc. VAT
£5.49 ex. VAT

From: £6.59 inc. VAT
£5.49 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £4.01 inc. VAT
£3.34 ex. VAT

From: £4.01 inc. VAT
£3.34 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £4.36 inc. VAT
£3.63 ex. VAT

From: £4.36 inc. VAT
£3.63 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £4.21 inc. VAT
£3.51 ex. VAT

From: £4.21 inc. VAT
£3.51 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

£11.48 inc. VAT
£9.57 ex. VAT

£11.48 inc. VAT
£9.57 ex. VAT

From: £115.20 inc. VAT
£96.00 ex. VAT

From: £115.20 inc. VAT
£96.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £217.20 inc. VAT
£181.00 ex. VAT

From: £217.20 inc. VAT
£181.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £146.40 inc. VAT
£122.00 ex. VAT

From: £146.40 inc. VAT
£122.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £78.00 inc. VAT
£65.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

  • £37.01 inc. VAT
    £30.84 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.

  • £70.80 inc. VAT
    £59.00 ex. VAT

    £70.80 inc. VAT
    £59.00 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.

  • £8.14£1.19 inc. VAT
    £6.78£0.99 ex. VAT
      ARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material.       For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here.  

  • £3.61£1.19 inc. VAT
    £3.01£0.99 ex. VAT

    £3.61£1.19 inc. VAT
    £3.01£0.99 ex. VAT
      Bond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer.   PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH   BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf