Bond It Flashing Tape – Various Sizes

From: £7.81 inc. VAT
£6.51 ex. VAT

Checkout
  • Suitable For: use as flashing on flat and pitched roofs, parapets and chimney stacks
  • Area of use: INT & EXT
  • Volume: 100mm x 10m 150mm x 10m 225mm x 10m 300mm x 10m 450mm x 10m 600mm x 10m
  • Type: tape
  • Colour: grey
  • Brand: Bond It
  • Manufactuer: Bond It
  • Box Size: various
Data Sheets

Download Tech Data

 

Bond It Flashing Tape is a crease resistant, lead coloured, self-adhesive flashing tape for general repairs and sealing. Designed for use as flashing on flat and pitched roofs, on parapets and chimney stacks. It is also ideal for sealing around RSJ’s, flues, concrete columns, roof-lights, guttering and extractor vents. The strength of facing gives resistance to puncturing and the bitumen gives flexibility and adhesion but without the problems of slump.

 

It comprises heavy-duty facing coated with a minimum 1.2mm thickness of pressure sensitive modified bitumen. The adhesive content is specially formulated for flexibility at low temperatures and resistance to flow at high temperatures and an immediate bond is obtained by applying firm hand pressure. The strength of the bond increases with time. The thickness of the self-adhesive bitumen ensures very close contact, even on comparatively rough surfaces, while the product’s durability provides long-lasting protection combined with an attractive appearance.

Supplied in rolls for fast and clean application and conforms readily to awkward contours, providing excellent weather protection. It can be used for all flashing and roofing applications and general water sealing repairs on masonry, asbestos, timber, metal or glass. No special skills or tools are required.

 

Flashing Tape is available in 10 metre rolls and in widths of 100, 150, 225, 300, 450 and 600mm. It is also available in 3 metre rolls in widths of 100, 150 and 225mm.

 

 

 

For more in our range of tapes, please click here. Alternatively to shop our range of adhesives, click here.

For more information on Bond It, you can visit their website by clicking here

 

Bond It Flashing Tape is designed for use as flashing on flat and pitched roofs, on parapets and chimney stacks. It is also exceptional for sealing around RSJ’s, flues, concrete columns, rooflights, guttering and extractor vents. The strength of the facing gives resistance to puncturing and the bitumen gives flexibility and adhesion but without the problems of slump.

– Replacement & repair of flashings.
– Repair & sealing of down pipes.
– Sealing glazing & roof lights.
– Sealing parapets.
– Waterproofing of coping & roof ridges.
– General roof repairs.

 

 

PREPARATION
All surfaces must be structurally smooth, clean, dry and dust-free. Any loose matter must be removed with a wire brush. Any moss or lichen should be removed using a fungicidal wash, such as Bond It MOULD STOP. Porous or rough surfaces should be primed with BITUMEN PRIMER and allowed to dry before applying the Flashing Tape.

In very cold weather Tape should be stored indoors in warm (18°C+) conditions overnight before use.

APPLICATION
1. Cut a section of FLASHING TAPE to the required length, remove the release paper and press down the adhesive bitumen to the previously prepared surface.
2. Ensure full contact by smoothing down with a cloth, taking care to eliminate air bubbles.
3. Roll down the edges with a wall paper roller or trowel to make a good edge seal. Take care to avoid damaging the FLASHING TAPE surface.
4. Joined sections of FLASHING TAPE. should always be overlapped by a minimum of 25mm (one inch) and well rolled down.

 

Note: in cold weather adhesion will be improved by storing the roll in a warm room for 12 hours or more before use, or by gently warming the backing strip during application.

 

Reviews

There are no reviews yet.

Be the first to review “Bond It Flashing Tape – Various Sizes”

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10
From: £10.21 inc. VAT
£8.51 ex. VAT
From: £10.21 inc. VAT
£8.51 ex. VAT
From: £6.00 inc. VAT
£5.00 ex. VAT
From: £6.00 inc. VAT
£5.00 ex. VAT
From: £3.83 inc. VAT
£3.19 ex. VAT
From: £3.83 inc. VAT
£3.19 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
£198.00 inc. VAT
£165.00 ex. VAT
£198.00 inc. VAT
£165.00 ex. VAT
£2.46 inc. VAT
£2.05 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT