- Product ID: FOS-MS2PRIMER
- Suitable For: use in joints alongside Nitoseal that are set to be intermittently or permanently immersed in water
- Volume: 750ml
- Container Type: tin
- Type: primer
- Brand: FOSROC
- Manufactuer: FOSROC
Data Sheets
FOSROC MS2 is a superior two-part priming system used in conjunction with Fosroc Nitoseal sealant range.
FOSROC MS2 Nitoseal primer is formulated for priming prior to application of the sealant.
For all other FOSROC products available on our website, please click here.
For any further information you require or need on FOSROC, please visit their website here.
It is required for use in joints alongside Nitoseal that are set to be intermittently or permanently immersed in water, or where the substrate is likely to be saturated (for example, externally).
APPLICATION
Empty the entire contents of the hardener tin into the base tin, replace the base tin cap. Mix by shaking thoroughly for 2 minutes. Prime the joint face using a dry, clean brush. Avoid over-application of the primer & avoid causing puddles in the bottom of the joint. The sealant should be applied between 30 minutes & 4 hours after the primer has been applied. If the area is not sealed within this time frame, the primer residue will need to be removed by either grit blasting or grinding, before the primer can be reapplied. The mixed Primer MS2 solution must be applied within one working day. Do not use part packs.
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.56 inc. VAT
£2.97 ex. VAT
From: £47.33 inc. VAT
£39.44 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.