- Product ID: 489633
- Suitable For: Pointing around soft and hardwood timber. Metal and concrete/stone window and door frames
- Area of use: INT & EXT
- Application Method: silicone gun
- Volume: 300ml
- Container Type: cartridge
- Type: sealant
- Colour: grey
- Brand: Everbuild
- Manufactuer: Everbuild
- Box Size: 1
Everbuild Everflex 145 Butyl Sealant is a permanently plastic one-part sealant based on PU Technology. That provides a weatherproof seal in a variety of interior and exterior applications. Everbuild Everflex 145 Butyl Rubber Sealant forms a skin in approximately 24hrs but remains plastic underneath. The sealant allows joint movement of 5% and can be painted after application & cure time.
Advantages
– Overpaintable.
– Adheres to most common building surfaces.
– High solid formulation
– Good weathering properties.
For all other Everbuild products on our website, please click here.
For further information on any other Everbuild products, please visit their website here.
– Pointing around soft and hardwood timber. Metal and concrete/stone window and door frames.
– Sealing pre-cast concrete panels.
APPLICATION
SURFACE PREPARATION
All substrates to be sealed must be dry and clean. The depth of the joint should be roughly half of the width. Reduce joint depth with Everbuild Expanding Foam or Backer Rod.
APPLICATION METHOD / TOOLS
Using a sharp blade, cut the tip of the cartridge, taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45 degrees with an opening slightly larger than the gap to be sealed.
Apply using a standard sealant gun. Best results will be obtained by keeping the gun at a constant angle to the surface to be sealed.
LIMITATIONS
– Do not use in conjunction with bitumen or asphalt. Use WEATHER MATE.
– Do not use on plastic, PVCu windows, polycarbonate or acrylic sheet.
– It should not be used in areas where it will be subjected to interference or damage. In these cases, use Puraflex 40.
1 review for Everbuild Everflex 145 Butyl Sealant 300ml
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.56 inc. VAT
£2.97 ex. VAT
From: £47.33 inc. VAT
£39.44 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Gerry Robson (verified owner) –
good product, good delivery