Bond-It 1 Part Wood Filler 250ml – Box of 6

From: £9.50 inc. VAT
£7.92 ex. VAT

Checkout
  • Suitable For: filling small imperfections (max 5mm depth) and covering the recesses left by nails and screws in wood.
  • Area of use: INT & EXT
  • Application Method: spreader
  • Time to full cure: 30 minutes
  • Volume: 250ml
  • Container Type: tub
  • Type: filler
  • Colour: 5 colours
  • Brand: Bond-It
  • Manufactuer: Bond-It
  • Box Size: 6

 

1 Part Wood Filler is an easy to use, ready mixed, high quality, solvent‐free filler, ideal for filling small imperfections (max 5mm depth) and covering the recesses left by nails and screws in wood.

BENEFITS

– Can be stained, painted, varnished or dyed once cured.
– Solvent‐free, low odour and non‐flammable.
– Waterproof.
– Suitable for internal and external applications.

 

For our full range of filler for wood, please click here. For all other Bond-it products on our website, please click here.

For any further information you may need on Bond-it, please visit their website here.

 

1 Part Wood Filler is for general wood filling of windowsills, frames, bannisters, MDF and laminates, etc. Repairing wood damaged by wet rot in both internal and external locations. Repair damage and chips to parquet or laminate flooring, wooden furniture, etc.

 

PREPARATION

Ensure the repair area is clean and dry and free from dust or any contamination that may affect adhesion. Wet down the surfaces that the material is to be applied to. NOTE: If you intend to overstain the repair, choose the filler colour closest to the wood you are filling, not the stain you intend to use. Always check the stain on a small area as the filler may absorb the stain at a different rate to the wood. As the filler may absorb some stains at different rates to the surrounding timber, always test a small area first.

APPLICATION

Stir well before use. Apply with a wetted filling knife or spreader, forcing into cracks and holes. For deep holes, build up in layers allowing each layer to dry. Leave slightly proud, and when completely dry, sand down. Drying time – touch dry in 30 minutes. When overpainting, staining or varnishing, you may get a colour difference with the surrounding wood, so always check on a small area first. Do not add stain to Bond It ALL PURPOSE WOOD FILLER. Not suitable for filling gaps between floorboards.

LIMITATIONS

As the filler may absorb some stains at different rates to the surrounding timber, always test a small area first. Note: filler may dry darker. Do not exceed 5mm in one coat. For holes deeper than 5mm or for areas subject to impact, such as doors and window frames, use Bond It 2 PART WOOD FILLER. Protect from rain when used externally for at least 5 hours. Do not apply below 5o C.

Reviews

There are no reviews yet.

Be the first to review “Bond-It 1 Part Wood Filler 250ml – Box of 6”

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10
From: £9.54 inc. VAT
£7.95 ex. VAT
From: £9.54 inc. VAT
£7.95 ex. VAT
From: £6.00 inc. VAT
£5.00 ex. VAT
From: £6.00 inc. VAT
£5.00 ex. VAT
From: £3.83 inc. VAT
£3.19 ex. VAT
From: £3.83 inc. VAT
£3.19 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £2.65 inc. VAT
£2.21 ex. VAT
From: £2.65 inc. VAT
£2.21 ex. VAT
From: £20.23 inc. VAT
£16.86 ex. VAT
From: £20.23 inc. VAT
£16.86 ex. VAT
From: £24.76 inc. VAT
£20.63 ex. VAT
From: £24.76 inc. VAT
£20.63 ex. VAT
£3.19 inc. VAT
£2.66 ex. VAT
£3.19 inc. VAT
£2.66 ex. VAT
£5.09 inc. VAT
£4.24 ex. VAT
£5.09 inc. VAT
£4.24 ex. VAT
£13.24 inc. VAT
£11.03 ex. VAT
£13.24 inc. VAT
£11.03 ex. VAT
£198.00 inc. VAT
£165.00 ex. VAT
£198.00 inc. VAT
£165.00 ex. VAT
£2.46 inc. VAT
£2.05 ex. VAT
  • From: £20.23 inc. VAT
    £16.86 ex. VAT
    From: £20.23 inc. VAT
    £16.86 ex. VAT
      Bond It Colour Enhancer is designed to enhance coloured concrete and block paving and protect from water penetration, oil or grease spillages and dirt/grime build-up. It will enhance the present colour and extend the lifespan of the treated surface. A ready-to-use, coloured solution for use on concrete, block paving, paving slabs, walling and roof tiles. Restores colour Reduces water penetration, staining and dirt/grime build-up UV stable formulation Helps inhibit organic growth Solvent-free formulation – low odour Facilitates easier cleaning Improves water r
  • From: £24.76 inc. VAT
    £20.63 ex. VAT
    From: £24.76 inc. VAT
    £20.63 ex. VAT
      Bond It Geo-Fix All Weather is a single component joint filling system for the simple and rapid pointing of paved areas with joints over 5mm. Ready-to-use, simple brush application. Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather.   Features & Benefits: - Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather - Can be used on joint widths of a minimum of 5 mm wide and a minimum of 15 mm deep. Semi‐rigid allowing for expansion and contraction of paving - GEO‐FIX All Weather is unaffected by w
  • £37.01 inc. VAT
    £30.84 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.
  • £70.80 inc. VAT
    £59.00 ex. VAT
    £70.80 inc. VAT
    £59.00 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.