CLEARANCE – Mapesil LM JASMINE

12 Available


£17.18£12.00 inc. VAT
£14.32£10.00 ex. VAT

In Stock

Checkout
  • Suitable For: sealing all materials that are sensitive to acids and plasticizing agents, marble, granite, sandstone and quartz.
  • Area of use: EXT
  • Application Method: silicone gun
  • Volume: 310ml
  • Container Type: cartridge
  • Type: sealant
  • Colour: jasmine
  • Brand: Mapei
  • Manufactuer: Mapei
Features & Benefits

WHERE TO USE

Mapesil LM is a low-modulus, solvent-free sealant, formulated for sealing all materials that are sensitive to acids and plasticizing agents, marble, granite, sandstone and quartz. Due to the chemical nature, which deters surface bleeding or the migration of plasticizing agents which would stain the surface.

The characteristics of the product also make it suitable for particularly delicate substrates, such as cellular concrete, brickwork and varnished or enamelled wood.

It is also ideal for contact with absorbent mineral surfaces such as concrete, renders and fibre-cement.

Performs well in treated water typically found in swimming pools.

Thanks to the elasticity of Mapesil LM, it is suitable for a number of sealing applications, such as:
– pre-fabricated panels;
– window/door fittings and wall surrounds;
– pipe-work and vertical walls;
– similar and/or different types of coating materials.

It is also suitable for sealing joints in floors with limited
pedestrian traffic.

TECHNICAL CHARACTERISTICS

Mapesil LM is a solvent-free, one-component, neutral-cure silicone sealant which does not emit unpleasant odours, available in the form of a thixotropic paste. The product will remain flexible from a temperature range of between -40°C and +150°C. Mapesil LM delays the formation of surface mould. Mapesil LM offers good resistance to chemical agents. However, because of the wide range of products and service conditions, if in doubt carry out preliminary tests beforehand.

Mapesil LM bonds perfectly to most types of substrate used in the building industry without applying a primer beforehand (glass, ceramic, marble, aluminium, zinc-plated sheet metal, concrete, stainless steel and PVC).

If in doubt, please contact the MAPEI Technical Services Department or carry out preliminary tests beforehand. Mapesil LM is suitable for substrates sensitive to acids, whereas conventional neutral or acid sealants normally provoke changes in colour or staining of the substrate.

RECOMMENDATIONS

• Do not apply Mapesil LM on heavily-plasticised plastics, rubber or bitumen. The oil and plasticising agents in the substrate may migrate to the surface and compromise the bond

• Do not use for sealing floors subject to intense traffic (use Mapeflex PU45, Mapeflex PU20 or Mapeflex PU21).

• When using on marble, do not use Primer FD

CURING

When Mapesil LM is exposed to the air, the surrounding humidity sets off the cure reaction and the sealant becomes flexible.

The surrounding temperature only has a small impact on the cure rate of Mapesil LM, while the level of humidity in the surrounding air has the most influence.

STORAGE

You are able to store cartridges for up to 18months in a dry, cool environment.

SAFETY INSTRUCTIONS FOR PREPARATION AND APPLICATION

Please use gloves, eyes protection and to take the usual precaution for the handling of chemical products. For further information, please refer to the latest version of our Material Safety Data
Sheet.

PRODUCT FOR PROFESSIONAL USE.

For all other Mapei products on our website, please click here.

For any further information on Mapei products, please visit their website here.

Mapesil LM is a low-modulus, solvent-free sealant, formulated for sealing all materials that are sensitive to acids and plasticizing agents, marble, granite, sandstone and quartz. Due to the chemical nature, which deters surface bleeding or the migration of plasticizing agents which would stain the surface.

The characteristics of the product also make it suitable for particularly delicate substrates, such as cellular concrete, brickwork and varnished or enamelled wood.

It is also ideal for contact with absorbent mineral surfaces such as concrete, renders and fibre-cement.

Performs well in treated water typically found in swimming pools.

TECHNICAL CHARACTERISTICS

Mapesil LM is a solvent-free, one-component, neutral-cure silicone sealant which does not emit unpleasant odours, available in the form of a thixotropic paste. The product will remain flexible from a temperature range of between -40°C and +150°C. Mapesil LM delays the formation of surface mould. Mapesil LM offers good resistance to chemical agents. However, because of the wide range of products and service conditions, if in doubt carry out preliminary tests beforehand.

Mapesil LM bonds perfectly to most types of substrate used in the building industry without applying a primer beforehand (glass, ceramic, marble, aluminium, zinc-plated sheet metal, concrete, stainless steel and PVC).

If in doubt, please contact the MAPEI Technical Services Department or carry out preliminary tests beforehand. Mapesil LM is suitable for substrates sensitive to acids, whereas conventional neutral or acid sealants normally provoke changes in colour or staining of the substrate.

 

 

For optimum application, use with a PC Cox Easiflow Skeleton Mastic Applicator Gun, and finish with the Bond It Professional 4 Part Sealant Applicator Tool Kit for a smooth neat finish.

For all other Mapei products on our website, please click here.

For any further information on Mapei products, please visit their website here.

 

Thanks to elasticity of Mapesil LM, it is suitable for a number of sealing applications, such as:
– pre-fabricated panels;
– window/door fittings and wall surrounds;
– pipe-work and vertical walls;
– similar and/or different types of coating materials.

It is also suitable for sealing joints in floors with limited pedestrian traffic.

CURING

When Mapesil LM is exposed to the air, the surrounding humidity sets off the cure reaction and the sealant becomes flexible.

The surrounding temperature only has a small impact on the cure rate of Mapesil LM, while the level of humidity in the surrounding air has the most influence.

STORAGE

You are able to store cartridges for up to 18months in a dry, cool environment.

RECOMMENDATIONS

• Do not apply Mapesil LM on heavily-plasticised plastics, rubber or bitumen. The oil and plasticising agents in the substrate may migrate to the surface and compromise the bond

• Do not use for sealing floors subject to intense traffic (use Mapeflex PU45, Mapeflex PU20 or Mapeflex PU21).

• When using on marble, do not use Primer FD

 

Reviews

There are no reviews yet.

Be the first to review “CLEARANCE – Mapesil LM JASMINE”

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10

From: £8.03 inc. VAT
£6.69 ex. VAT

From: £8.03 inc. VAT
£6.69 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £3.83 inc. VAT
£3.19 ex. VAT

From: £3.83 inc. VAT
£3.19 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £9.54£6.00 inc. VAT
£7.95£5.00 ex. VAT

From: £9.54£6.00 inc. VAT
£7.95£5.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £11.34 inc. VAT
£9.45 ex. VAT

From: £11.34 inc. VAT
£9.45 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £6.59 inc. VAT
£5.49 ex. VAT

From: £6.59 inc. VAT
£5.49 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £4.01 inc. VAT
£3.34 ex. VAT

From: £4.01 inc. VAT
£3.34 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £4.36 inc. VAT
£3.63 ex. VAT

From: £4.36 inc. VAT
£3.63 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £4.21 inc. VAT
£3.51 ex. VAT

From: £4.21 inc. VAT
£3.51 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

£11.48 inc. VAT
£9.57 ex. VAT

£11.48 inc. VAT
£9.57 ex. VAT

From: £115.20 inc. VAT
£96.00 ex. VAT

From: £115.20 inc. VAT
£96.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £217.20 inc. VAT
£181.00 ex. VAT

From: £217.20 inc. VAT
£181.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £146.40 inc. VAT
£122.00 ex. VAT

From: £146.40 inc. VAT
£122.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £78.00 inc. VAT
£65.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

  • £37.01 inc. VAT
    £30.84 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.

  • £70.80 inc. VAT
    £59.00 ex. VAT

    £70.80 inc. VAT
    £59.00 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.

  • £8.14£1.19 inc. VAT
    £6.78£0.99 ex. VAT
      ARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material.       For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here.  

  • £3.61£1.19 inc. VAT
    £3.01£0.99 ex. VAT

    £3.61£1.19 inc. VAT
    £3.01£0.99 ex. VAT
      Bond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer.   PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH   BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf