Cromar Alpha Chem Plasterers Grit Coat

Easy to apply, by brush or roller, with an easily identifiable colour to ensure full coverage, it is ideal for use on surfaces such as plaster, concrete and difficult, low or non‐porous substrates.

APPLICATION

– STIR WELL BEFORE USE
– Ready to use ‐ do not dilute the product.
– Ensure surfaces are sound, clean, dry and free from contaminates, such as loose or flaking material. Make sure that the background is sound and will provide sufficient support.
– Apply one coat, using either brush or roller, and leave to dry thoroughly for a minimum of 24 hours prior to plastering.
– Cold or humid conditions can increase the drying time. Ensure product is not used at temperatures below 5°
– It is the user’s responsibility to dispose of all packaging correctly.

COVERAGE

Approximately 4‐5m² / litre dependent on the porosity of the substrate.

LIMITATIONS

– Do not use for external applications.
– As the manufacturer cannot know all the uses its products may be put to, it is the user’s responsibility to determine suitability of use. If in doubt, please contact Technical Services department for advice. Safety Data available on request.