Cromar AlphaChem Mortar Stain Remover 5 Litres
£4.40 inc. VAT
£3.67 ex. VAT
- Product ID: X3MSR5BOX
- Suitable For: dissolving cement and mortar stains on brickwork, concrete, paving and render
- Area of use: INT & EXT
- Volume: 5 LTR
- Container Type: bottle
- Type: stain remover
- Colour: pale yellow
- Brand: Cromer
- Manufactuer: Cromer
- Box Size: 1
Cromar AlphaChem Mortar Stain Remover is a rapid, concentrated hydrochloric acid‐based formula for dissolving cement and mortar stains on brickwork, concrete, paving and render. It can also be used for removing efflorescence.
For more information on Cromer, please visit their website here.
For other concrete related products, click here. For primers and cleaners, please click here.
Used for dissolving cement and mortar stains on brickwork, concrete, paving and render. It can also be used for removing efflorescence.
APPLICATION
– Always wear appropriate protective gloves, clothing and eye/face protection whilst using Mortar Stain Remover.
– Read the Safety data sheet prior to use.
– Wet the area with water and test a small inconspicuous area before full scale use.
– Using neat, pour into a plastic container (never metal) and apply using a scrubbing brush to the substrate, working well to remove ingrained dirt.
– Leave for 20 minutes, then scrub again with clean water. Repeat if necessary. Thoroughly wash all areas with clean water to neutralise the cleaner and remove loose dirt and grime.
– For use on patios, ensure you dilute with water (1:1, always adding Mortar Stain Remover to the water, adding mortar stain to water could result in an adverse situation), apply and rinse with clean water as above.
LIMITATIONS
– Always test a small inconspicuous area before full scale use.
– On sensitive areas, dilution is recommended. Care should be taken when using on internal surfaces, natural stone and coloured paving – test a small area inconspicuous area before use.
– It is the user’s responsibility to ensure suitability for use.
2 reviews for Cromar AlphaChem Mortar Stain Remover 5 Litres
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
From: £14.96 inc. VAT
£12.47 ex. VAT -
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £3.56 inc. VAT
£2.97 ex. VAT
From:
From: £11.34 inc. VAT
£9.45 ex. VAT
From:
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £4.36 inc. VAT
£3.63 ex. VAT
£12.38 inc. VAT
£10.32 ex. VAT
£4.86 inc. VAT
£4.05 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT
£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Anonymous (verified owner) –
As described
David Ellis (verified owner) –
Excellent product and excellent service