Search results: “mapei”
Customer matched zone "United Kingdom (UK)"
View basket “Mapei Shower Waterproofing Kit” has been added to your basket.
-
Rated 4.00 out of 5From:£30.64£23.20 ex. VATKerapoxy CQ is certified by the University of Modena (Italy) according to ISO 22196:2007 standards as a grouting mortar protected against the formation and proliferation of micro-organisms. TECHNICAL CHARACTERISTICS Kerapoxy CQ is a two-component, epoxy resin-based product with silica sand and other special components. It has excellent resistance to acids and is very easy to clean. Kerapoxy CQ has a bacteriostatic agent, preventing the proliferation of bacteria and forming mould on the surfaces of grouts, making tiled surfaces hygienic and safe, thanks to the innovative BioBlock technolo -
Rated 5.00 out of 5From:£21.67£11.00 ex. VATUltracolor Plus forms a mortar with the following characteristics: - water-repellent and droplet-effect - colours resistant to ultra-violet rays and atmospheric agents - ready for light foot traffic after a short period of time - After that is shrinkage compensated, therefore free from cracks Therefore it has optimum resistance to abrasion, compression and flexural strength, even after freeze/thaw cycles, and therefore optimum durability. In addition, it has good resistance to acids with pH > 3. To calculate quantities, please use the Mapei grout calculator here -
Rated 5.00 out of 5From:£8.42£6.38 ex. VATKeracolor Flex is an improved, cementitious grout with water repellent properties and high abrasion resistance. Keracolor Flex is a blend of specially selected hydraulic binders with fine graded aggregates, polymers, additives and colourants. High-quality hydrophobic additives enhance the grout’s technical performance imparting water repellent properties to the surface. This reduces dirt pickup and increases the grout’s durability and longevity. When mixed and applied correctly to the joints, the following properties are obtained: • water repellent surfaces; • joint w -
£37.48 ex. VATMapei Ultraflex S2 Quick, a gray-hued powder, comprises a unique blend of specialized cements, carefully graded sand, a substantial amount of synthetic resins, and micronized elastomers, all formulated within MAPEI's dedicated Research Laboratories. When combined with water, it yields a mortar with the following distinct attributes: Innovative Ultralite TechnologyTM yields a lightweight product, providing two notable advantages: a. Weight advantage: Ultraflex S2 Quick, weighing less than traditional cementitious adhesives of equivalent volume, facilitates easier handling and re -
Rated 5.00 out of 5£29.60 - £32.47 ex. VATMapei Ultralite S1 is a low-dust, one-component, and flexible lightweight adhesive designed for both walls and floors - the S1 adhesive. This adhesive boasts a non-slip formula with an extended open time, making it an ideal choice for various tile applications, including ceramic, porcelain, and natural stone tiles, as well as mosaics. It excels, particularly when used for affixing thin porcelain tiles. Suitable for application on screed, render, and plywood substrates, this adhesive is not only versatile but also environmentally conscious, containing over 30% recycled materials and p -
£18.12 - £77.07 ex. VATMapei Primer FD serves as an adhesion enhancer for silicone and hybrid sealants available in the Mapei product line. It finds application on various surfaces including concrete, wood, metal, painted surfaces, plastic, rubber, and especially for joints exposed to extended water immersion. It is perfect as a bonding enhancer when applied before MAPESIL AC when using it for concrete, wood, metal, painted surfaces, plastic and rubber. Mapei FD is currently a non-stock item & extended lead times are advised at anywhere up to 3-4 weeks For more in our range of primers, p -
Rated 5.00 out of 5£7.47 - £92.82 ex. VATMapei Primer G is a synthetic resin-based primer that, upon application to any surface, dries to create a flexible, glossy coating that enhances the integrity of the surface as needed. Primer G also enhances the bonding of smoothing compounds, paint, wallpaper adhesive, tile adhesive, and mortar for rendering. The layer on gypsum or cement surfaces acts as a barrier, preventing chemical reactions between sulfates and cement aluminates in gypsum that, when exposed to moisture, can lead to the formation of the problematic "ettringite" salt, which can cause separation. When used before -
£60.07 ex. VATMapei Shower Waterproofing Kit offers a vital waterproofing solution that is in line with the demands of modern shower installations. Pre-mixed and ready for immediate use. Swift and efficient application. Suitable for installing floor coverings within 12 to 24 hours. Remarkable elongation characteristics. No need for additional reinforcement. Practical applications include waterproofing bathroom and shower walls and floors prior to ceramic tile, natural stone, and mosaic installation. It's also ideal for waterproofing kitchen walls, floors, and countertops before -
£45.59 ex. VATMapei Mapeproof Swell is a single component hydro-expansive paste supplied in cartridges, used to waterproof and seal cracks in concrete. It represents a singular hydrophilic paste, designed for use in repair and waterproofing endeavors. It possesses the versatility to be applied to surfaces that are either damp or irregular, and it remains effective across a wide range of temperatures while accommodating various types of infiltrating or seeping water. Upon contact with water, Mapeproof Swell undergoes expansion, displaying exceptional resistance to substantial hydrostatic pressur -
£98.33 ex. VATMapeflex PU 45 FT Fast-curing, paintable polyurethane sealant and adhesive featuring a substantial elasticity modulus suitable for accommodating movements of up to 20%. It was specifically designed to effectively seal expansion and distribution joints, whether they are in horizontal or vertical surfaces. This versatile sealant is particularly suitable for areas that may occasionally come into contact with hydrocarbons, making it ideal for a range of applications. Additionally, it is highly recommended for creating flexible bonds between various materials commonly employ -
£11.73 ex. VATMapei MapeStik is a high-tack, pre-mixed adhesive paste designed for affixing ceramic tiles securely. Intended for application on indoor walls, it's particularly suitable for attaching tiles to plaster and plasterboard surfaces. This adhesive is perfect for bonding porous ceramic tiles and mosaics sized up to 300 mm x 300 mm onto interior walls. MapeStik is composed of a water dispersion containing synthetic resins, carefully graded minerals, and diverse additives. MapeStik comes in a creamy, ready-to-use paste form that can be easily applied with a trowel. It boasts excellent -
£175.33 ex. VATMapei Elastocolor is a protective and decorative elastic paint based on acrylic resins in water dispersion. It is used to protect concrete and cement surfaces from aggressive agents in the atmosphere. Once dried, Elastocolor forms a very elastic film that's impermeable to water but still permeable to vapour. At the same time it gives the treated structure a nice, aesthetic appearance. Due to its elastic characteristics, Elastocolor protects and waterproofs concrete structures and renders that have hair-line cracks present. It forms a bridge over the cracks creating a strong and
