Bond It Eco Cem-Klene 1 Litre
£4.63 inc. VAT
£3.86 ex. VAT
- Product ID: BDECEM1
- Suitable For: cleaning tools, cement mixers and removing efflorescence and mortar stains
- Area of use: EXT
- Volume: 1 LTR
- Container Type: bottle
- Type: cleaner
- Colour: clear
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: 1
Data Sheets
Bond It Eco Cem-Klene is a fast acting, cement, concrete and mortar cleaner with low impact on the environment. Eco Cem-Klene is safer than traditional hydrochloric acid based stain removers. Safer than traditional hydrochloric acid based stain removers, this can be used neat or diluted to treat areas and clean tools.
Benefits:
– Non aggressive.
– Safer alternative to hydrochloric acid.
– More environmentally friendly, biodegradable formula.
– Removes wet and cured cement, mortar and concrete.
– Removes efflorescence.
– Cleans stains from pathways and patios.
– Cleans tools and cement mixers.
Coverage: Approx. 10m2 per litre of diluted product depending on porosity of substrate.
For more in our range of cleaners, please click here. For more in our range from Bond It, click here.
Alternatively, if you would like more information on Bond It, you can visit their website by clicking here.
Eco Cem-Klene can be used neat or diluted to treat areas and tools. Suitable for cleaning tools, cement mixers and removing efflorescence and mortar stains from walls, patios and paths. Can be diluted and used as a general purpose cleaner for ingrained dirt, grease and stains on concrete.
APPLICATION
Thoroughly wet the surface with clean water prior to application. Treat a small inconspicuous area first to check suitability.
Tools: Use neat. ECO CEM-KLENE will remove fresh cured cement and wet or semi-cured cement from tools. Spray directly on to tool and leave for 15 minutes if lightly soiled and up to 3 hours for heavy stained items. Removal of stubborn stains can be assisted by using a scourer. Rinse thoroughly with clean water. With mixing equipment it is recommended a power washer, ideally with hot water, be used.
Surfaces: Moisten surfaces and either spray directly avoiding mist formation onto the stain or brush from top to bottom, ensuring the correct dilution rate has been followed. Leave for approx. 5-10 minutes then rinse with a hose or power washer, using a brush if required, until clean. Do not allow the product to dry on the surface, it must be thoroughly rinsed away.
LIMITATIONS
Not for use on marble, granite or travertine surfaces. This product may discolour coloured concrete or pavers. Do not use on soft metals such as lead, copper, aluminium or brass and avoid any over spray to these metals.
Remove any excess or spills straight away with clean water. Do not apply to dry surfaces or allow ECO CEM-KLENE to dry on the surface. Ensure equipment is thoroughly rinsed to avoid rusting/corrosion.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.56 inc. VAT
£2.97 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £3.60 inc. VAT
£3.00 ex. VAT
From: £4.36 inc. VAT
£3.63 ex. VAT
From: £4.21 inc. VAT
£3.51 ex. VAT
From: £3.48 inc. VAT
£2.90 ex. VAT
From: £25.50 inc. VAT
£21.25 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT
£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.