Cromar Alpha Chem Mortar Stain Remover 5 Litres

Used for dissolving cement and mortar stains on brickwork, concrete, paving and render. It can also be used for removing efflorescence.

APPLICATION

– Always wear appropriate protective gloves, clothing and eye/face protection whilst using Mortar Stain Remover.
– Read the Safety data sheet prior to use.
– Wet the area with water and test a small inconspicuous area before full scale use.
– Using neat, pour into a plastic container (never metal) and apply using a scrubbing brush to the substrate, working well to remove ingrained dirt.
– Leave for 20 minutes, then scrub again with clean water. Repeat if necessary. Thoroughly wash all areas with clean water to neutralise the cleaner and remove loose dirt and grime.
– For use on patios, ensure you dilute with water (1:1, always adding Mortar Stain Remover to the water, adding mortar stain to water could result in an adverse situation), apply and rinse with clean water as above.

LIMITATIONS

– Always test a small inconspicuous area before full scale use.
– On sensitive areas, dilution is recommended. Care should be taken when using on internal surfaces, natural stone and coloured paving – test a small area inconspicuous area before use.
– It is the user’s responsibility to ensure suitability for use.