Cromar AlphaChem Block & Paving Sealer


From: £14.82 inc. VAT
£12.35 ex. VAT

Checkout
  • Suitable For: providing protection to both new and existing concrete and masonry
  • Area of use: EXT
  • Application Method: brush/roller
  • Time to full cure: 48 hours
  • Volume: 5 LTR, 25 LTR
  • Container Type: bottle
  • Type: sealant
  • Brand: Cromar
  • Manufactuer: Cromar
  • Box Size: 1

 

AlphaChem Block & Paving Sealer provides a durable penetrative seal to a wide variety of materials, such as concrete, screeds, brickwork, masonry and fibrous sheet materials. The sealer helps protect both new and existing concrete and masonry against pollutants that are both airborne and in water.

 

Benefits
– Non-yellowing
– Dual Sealing and Curing Action
– High Penetration
– Suitable to receiving subsequent treatments
– Can be used on both horizontal or vertical surfaces
– Vapour permeable, allowing the substrate to breath
– Provides increased protection to atmospheric gases, including carbon dioxide.

 

 

For more information on Cromer, please visit their website here.

For other waterproofing sealants, please click here. For our other waterproofing and water resistant products, please click here.

 

AlphaChem Block & Paving Sealer helps protect both new and existing concrete and masonry against water and airborne pollutants.

 

APPLICATION
All surfaces must be dry and sound and free from oil, grease, treatment debris and algae. New concrete must be left for 4 to 6 weeks before treatment. Do not apply if rain is likely within 3 to 4 hours of application. Apply to a small test area and leave for 24 hours. Apply by brush or roller, work well into the surface, and don’t brush out jointing sand. Apply one to two coats depending on the desired effect. Allow 2 to 3 hours between coats. The product must be left at least 48 hours to fully cure before the treated area can allow any form of traffic. Clean equipment with soapy water.

Reviews

There are no reviews yet.

Be the first to review “Cromar AlphaChem Block & Paving Sealer”

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10

From: £10.21 inc. VAT
£8.51 ex. VAT

From: £10.21 inc. VAT
£8.51 ex. VAT

From: £3.83 inc. VAT
£3.19 ex. VAT

From: £3.83 inc. VAT
£3.19 ex. VAT

From: £9.54£6.00 inc. VAT
£7.95£5.00 ex. VAT

From: £9.54£6.00 inc. VAT
£7.95£5.00 ex. VAT

From: £3.83£1.19 inc. VAT
£3.19£0.99 ex. VAT

From: £3.83£1.19 inc. VAT
£3.19£0.99 ex. VAT

From: £11.34 inc. VAT
£9.45 ex. VAT

From: £11.34 inc. VAT
£9.45 ex. VAT

From: £6.59 inc. VAT
£5.49 ex. VAT

From: £6.59 inc. VAT
£5.49 ex. VAT

From: £4.01 inc. VAT
£3.34 ex. VAT

From: £4.01 inc. VAT
£3.34 ex. VAT

From: £4.36 inc. VAT
£3.63 ex. VAT

From: £4.36 inc. VAT
£3.63 ex. VAT

From: £39.56£23.71 inc. VAT
£32.97£19.76 ex. VAT

From: £39.56£23.71 inc. VAT
£32.97£19.76 ex. VAT

From: £29.11£23.04 inc. VAT
£24.26£19.20 ex. VAT

From: £29.11£23.04 inc. VAT
£24.26£19.20 ex. VAT

From: £1.10 inc. VAT
£0.92 ex. VAT

From: £1.10 inc. VAT
£0.92 ex. VAT

£4.79£1.19 inc. VAT
£3.99£0.99 ex. VAT

£4.79£1.19 inc. VAT
£3.99£0.99 ex. VAT

£8.34 inc. VAT
£6.95 ex. VAT

£4.84£1.19 inc. VAT
£4.03£0.99 ex. VAT

£4.84£1.19 inc. VAT
£4.03£0.99 ex. VAT

  • £37.01 inc. VAT
    £30.84 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.

  • £70.80 inc. VAT
    £59.00 ex. VAT

    £70.80 inc. VAT
    £59.00 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.

  • £8.14£1.19 inc. VAT
    £6.78£0.99 ex. VAT
      ARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material.       For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here.  

  • From: £3.83£1.19 inc. VAT
    £3.19£0.99 ex. VAT

    From: £3.83£1.19 inc. VAT
    £3.19£0.99 ex. VAT
      Arbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity.      For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p