Dowsil 781 Acetoxy Silicone Sealant – Box of 12
- Suitable For: a range of non-porous surfaces including glass, aluminium, painted surfaces and composite boards.
- Area of use: INT
- Application Method: silicone gun
- Volume: 310ml
- Container Type: cartridge
- Type: sealant
- Colour: 6 colours
- Brand: Dowsil
- Manufactuer: Dowsil
- Box Size: 12
Dowsil 781 Acetoxy Silicone Sealant is a one-part, silicone sealant which has good adhesion to a range of non-porous surfaces including glass, aluminium, painted surfaces and composite boards. It offers excellent resistance to ageing, shrinkage, cracking and discolouring. This is also approved in certain countries for use in contact with potable water once cured.
TYPICAL PROPERTIES FOR DOWSIL 781
These values are not intended for use in preparing specifications. Please contact your local Dowsil sales office or your Global Dowsil Connection before writing specifications on this product
For all other Dowsil products on our website, please click.
For any further information you may need on Dowsil products, please visit the Geocel website here.
This item is currently experiencing a 4-5 week lead time
Dowsil 781 offers good adhesion to a range of non-porous surfaces including glass, aluminium, painted surfaces and composite boards.
HOW TO USE
SURFACE PREPARATION
Ensure that surfaces to be sealed are clean, dry, sound and free from frost, release agents, old sealants and other contaminants which could impair adhesion. All surfaces should be cleaned by wiping with a suitable solvent such as DOWSIL R40 Universal Cleaner on a clean oil- and lint-free cloth before application of sealant.
Note: When using any solvent, always provide adequate ventilation. Avoid heat, sparks and open flames. Use solvent resistant gloves. Observe and follow all precautions listed on solvent container label.
MASKING
Areas adjacent to the joints should be masked with tape to prevent contamination of the substrates and to ensure a neat sealant line. Masking tape should be removed immediately after tooling.
PRIMING
All joint surfaces other than glass and glazed ceramics should be primed. Furthermore, for specific advice, please refer to the DOWSIL ® Primers’ Guide or contact one of Dowsil’s Regional Service Centre for technical assistance.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
From:£4.46£1.80 inc. VAT£3.72£1.50 ex. VAT -
From: £120.36 inc. VAT
£100.30 ex. VAT -
£38.40 inc. VAT
£32.00 ex. VAT
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.