Everbuild Roof and Gutter Sealant 295ml

– Fills and seals gaps or cracks in a number of roofing applications.
– Bonds to roofing felt, lead, zinc & steel.
– For fixing tiles, slates and flashing into position.
– Joint sealing on gutters and downpipes.
– Sticking down loose roofing felt.

APPLICATION

SUBSTRATE PREPARATION

All surfaces must be clean and free from dust, grease and other contaminants. Furthermore, new concrete or mortar should be allowed adequate time to dry. May be applied to wet surfaces.

APPLICATION METHOD / TOOLS

For joints that lap over, apply a sufficient amount of sealant to bridge the gap and press surfaces together while product is still tacky. Cut the tip of the cartridge with a sharp blade, making sure not to damage the thread. Apply using a standard sealant gun. An improved joint appearance can be achieved by applying masking tape to either side of the joint, removing after 5 minutes from application.

CLEANING OF TOOLS

Clean tools in turps or white spirits.

LIMITATIONS

– Do not use on glass, use Everbuild 996 as a glass to glass sealant
– Can not be used on white upvc, use EB25.
– Do not use internally.
– Although product forms a surface skin, Everbuild Roof and Gutter Sealant will always be tacky to the touch.
– Do not use in applications where physical surface contact is likely.
– Furthermore, do not use in constant water immersion situations.