APPLICATION
UltraCare Stain Protector W Plus is ready to use. Shake well before application.
According to environmental conditions, apply the product 12 to 24 hours after washing on the clean, dry or evenly damp surface, in one or two coats, using a brush, cloth or fleece applicator. Treat the surface evenly, including grouts. Remove any excess wet product before it dries (5-10 minutes in normal conditions) using a clean cloth.
After drying (1-2 hours) a new coat can be applied, repeating the procedure described above. The application of more coats may be necessary in case of highly absorbent materials. The surface can be set to light foot traffic approx. 2 hours after application.
Avoid application on very cold or very hot surfaces (> +35°C or < +5°C). It is advisable to wash the surfaces treated with UltraCare Stain Protector W Plus using neutral detergents (such as UltraCare Multicleaner, diluted according to directions given in the respective Technical Data Sheet).
LIMITATIONS
Always carry out a preliminary test on a hidden sample area, to evaluate the aesthetic result before applying the product on the whole surface. The treatment may be repeated after a certain period of time to maintain its effect, according to the type of material, the traffic load and wear level of the surface. Do not apply the product on exposed surfaces if rain is forecast within the next few hours after application. If the product is used in interior, make sure the room is well aerated during application and drying.
Reviews
There are no reviews yet.