Soudal Silirub A 295ml – Box of 24
- Suitable For: joints in bathrooms and kitchens
- Area of use: INT
- Application Method: silicone gun
- Time to full cure: 24 hours
- Volume: 295ml
- Container Type: cartridge
- Type: sealant
- Colour: 6 colours
- Brand: Soudal
- Manufactuer: Soudal
- Box Size: 24
Data Sheets
Silirub A is a GENERAL PURPOSE acetoxy silicone sealant which is mould resistant. It has superb adhesion without the use of a primer on many common construction materials (glass, ceramic, porcelain, metals and wood), as well as being resistant to weathering, chemicals, and high and low temperatures.
Properties
– Very easy to apply
– Colourfast and UV resistant
– Impervious to mould
– Permanently elastic after curing
– Very good adhesion on many materials
– Typical acetic smell
For more products in our Soudal range, please click here. For application guns for this product, please click here.
Alternatively, for more information on Soudal, you can visit their website here.
Silirub A is ideal for the following applications:
– Joints in bathrooms and kitchens.
– Top sealing in glazing.
– Sealing in cold store rooms and container construction.
– Sealing in air conditioning systems.
APPLICATION
Application method: With manual- or pneumatic caulking gun.
Cleaning: Clean with White Spirit or Soudal Surface Cleaner immediately after use (before curing).
Finishing: With a soapy solution or Soudal Finishing Solution before skinning.
Repair: With the same material.
LIMITATIONS
– Because of the acid nature, certain metals (eg copper, lead) can be affected.
– Do not use on natural stones like marble, granite,…(staining). Use Soudal Silirub MA or Silirub+ S8800 for this application.
– Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.
– The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits or soap remaining’s will stimulate the development of fungi.
– A total absence of UV can cause a colour change of the sealant.
– In an acid environment or in a dark room, a white sealant can slightly turn yellow. Under the influence of sunlight it will turn back to its initial colour.
– When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution. This will cause the sealant not to adhere to that surface. Therefore we recommend to only dip the finishing tool in this solution.
– We strongly recommend not to apply the product in full sunlight as it will dry very fast.
– Do not use in applications where continuous water immersion is possible.
– Do not use on polycarbonate. Use Silirub PC instead.
– When using different reactive joint sealants, the first joint sealant must be completely hardened before the next one is applied.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
-
-
From:£9.41£4.80 inc. VAT£7.84£4.00 ex. VAT -
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.