Bond It Mega Stik PU Adhesive Foam 750ml
- Suitable For: f insulation boards and plaster boards to solid walls, metal and timber stud walls and battens
- Area of use: INT
- Application Method: foam gun
- Time to full cure: 1 hour
- Volume: 750ml
- Container Type: canister
- Type: foam
- Colour: beige
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: Singles Boxes of 12
Mega Stik is a fast curing, adhesive foam that has been specially developed for the rapid installation of plasterboard, insulation boards, floorboards and roof decking. Supplied in an aerosol can, the product can be used with a standard foam gun. A multi-purpose, polyurethane construction adhesive in a can – but not just a dry wall adhesive. The cured adhesive is an excellent heat insulator and has exceptionally good adhesion properties. Can also be used to dampen sound.
BENEFITS
- No mixing, no mess, no water, no dust!
- No need to carry heavy bags of plaster.
- One can fixes approximately 5 standard plaster boards.
- 30% time saving over conventional dry wall adhesives.
- Can be plastered in 1 hour.
- Can be applied direct to boards or the wall either horizontally or vertically.
- Can works on solid walls, metal and timber studding, battens and beams.
- No nails or screws required.
For more in our range of foams, please click here. For more in our range from Bond It, click here.
Alternatively, to find out more about Bond It, you can visit their website here.
Mega Stik is ideal for the installation of insulation boards and plaster boards to solid walls, metal and timber stud walls and battens. For fixing roof decking and floorboards to beams. And in place of backing rods in expansion joints and around window and door frames. It adheres to most common building materials: Extruded and expanded polystyrene; mineral wool; polyisocyanurate and polyurethane foam; plaster, gypsum boards; concrete, brick, stone; wood; metals; bituminous membranes.
APPLICATION
The instructions for the can must strictly be observed. Ideal working temperature for the foam is 20o C. If necessary, gently warm chilled cans in lukewarm water before use. Do not heat cans
above 50°C as there is risk of bursting. Shake the can for at least 30 seconds then fix the foam gun to the can. The can will operate in any position.
If fixing boards, apply beads to the back of the board wait approximately 2 minutes then press the board into place. If using insulation board apply 3 beads approximately 25mm wide to the
board. If using plasterboard apply approximately 400mm apart. Use mechanical fixings if working overhead. Apply the boards in rows, starting from the bottom of the wall, and going up to the top to avoid sliding. Apply to the substrate within 5 minutes of applying adhesive (depending on ambient conditions) and press firmly across the whole face of the board, starting at the top. Apply subsequent boards ensuring edges are firmly butted up at this stage.
Hold board in place for approx 1 minute until adhesive is cured enough to hold the board on its own. Plastering can commence after 1 hour!
If using a gun and you have not used all the can, clean the gun using Bond It GUN FOAM CLEANER, screw in proportioning screw which will ensure the foam will be usable for up to approximately 4 weeks.
LIMITATIONS
Not recommended for use on polyethylene, silicone, oil and grease.
5 reviews for Bond It Mega Stik PU Adhesive Foam 750ml
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Anonymous (verified owner) –
good service
mark prescott (verified owner) –
5 star. great experience. Highly recommend
Mark (verified owner) –
Good product worked well
Guy D. (verified owner) –
good stuff
Stewart Taylor (verified owner) –
good and cheep