- Sorry, this product cannot be purchased.
Bond It Pro Range – Mirror Pro Adhesive 310ml
£3.68 inc. VAT
£3.07 ex. VAT
- Product ID: BDMPROWH
- Suitable For: bonding of mirrors, glazed surfaces, ceramics, enamel, etc.
- Area of use: INT
- Application Method: silicone gun
- Time to full cure: 24 hours
- Volume: 310ml
- Container Type: cartridge
- Type: adhesive
- Colour: white
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: 1
Mirror Pro is a ready to use adhesive suitable for use on mirrors, glass and ceramics, which is non-corrosive and odourless. It has outstanding resistance to heat and humidity and does not
require a primer.
Benefits:
– Non‐corrosive
– Solvent‐free and odourless
– Quick curing
– Excellent adhesion
– Can be applied to wet surfaces
For more in our range of glues and adhesives, please click here. Or to shop our range of Bond It products, click here.
To visit Bond It’s website, please click here.
Mirror Pro is suitable for internal bonding of mirrors, glazed surfaces, ceramics, enamel, metals, PVCu, polycarbonate and treated or untreated wood to most common substrates.
APPLICATION
Ensure all surfaces are clean and free from grease, oil or any other contaminants that may hinder adhesion. Carefully cut the tip of the cartridge, taking care not to damage the threaded area. Cut off top of nozzle at an angle of approximately 45˚ to an opening of approximately 10mm. Screw on nozzle and place cartridge in a standard sealant gun.
For glass thickness of 2 to 4mm apply a 10mm bead of adhesive at 100mm intervals vertically to the back of the mirror, or surface to be bonded. Place the mirror in position and apply even pressure. Provide temporary support (tape) whilst the adhesive cures. The edges of the mirror can also be sealed with Mirror Pro if required but leave 24 hours after fixing.
For glass thicknesses above 6mm, mirrors greater than 1m2 area or mirrors on ceilings or sloping walls, Mirror Pro must be used in conjunction with mechanical fixings.
LIMITATIONS
Do not use on surfaces that bleed oils or plasticisers. Do not use in the manufacture of structural glazing. Any mirror made with 6mm glass or thicker needs mechanical fixing. Any mirror on a sloping wall or ceiling must have mechanical fixings. Any mirror greater than 1m2 must have mechanical fixings.
DO NOT use on safety mirrors.
1 review for Bond It Pro Range – Mirror Pro Adhesive 310ml
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Essex Shopfitters (verified owner) –
Amazing