Cromar AlphaChem Mortar Plasticiser
- Suitable For: enhancing the workability and freeze thaw resistance of brick and block laying mortars.
- Area of use: INT & EXT
- Volume: 5 LTR, 25 LTR
- Container Type: bottle
- Type: plasticiser
- Colour: pink
- Brand: Cromar
- Manufactuer: Cromar
- Box Size: 1
AlphaChem Mortar Plasticiser is designed to enhance the workability and freeze thaw resistance of brick and block laying mortars, reducing the likelihood of cracking and crazing. It may be used to replace or supplement the use of lime.
BENEFITS
– Mortar does not stiffen prematurely on the board but remains plastic.
– Mortar does not segregate or ‘bleed’.
– Mortar is less prone to drying out shrinkage.
– Increased adhesive strength.
– Up to 50% water reduction can be affected.
– Inexpensive to use: allows cement contents to be reduced (depending on present mix design).
– Increases rate of bricklaying or rendering work.
– Increased durability: mortar unaffected by freeze/thaw conditions.
– Improves weather resistance.
– Mortar remains workable at temperatures down to ‐2°C.
For more information on Cromar, please visit their website here.
For our full list of grouts and adhesives, please click here. For primers and cleaners, please click here.
Alpha Chem Mortar Plasticiser is designed to enhance the workability and freeze thaw resistance of brick and block laying mortars, reducing the likelihood of cracking and crazing. It may be used to replace or supplement the use of lime.
APPLICATION
Stir before use. Either premix the Mortar Plasticiser with water, or add directly into the mix at the same time as the water. N.B. The superior plasticising qualities will result in a significant reduction in water demand of any given mix. If preparing by hand, a vigorous mixing action should be used to ensure efficient production of ‘micro’ air entrainment properties. Test mixes should be made to determine the optimum dosage. Add Mortar Plasticiser at the rate of 140 – 280 cc per 50kg cement. Test mixes should be made to determine the optimum dosage for the prevailing conditions.
LIMITATIONS
– As the manufacturer cannot know all the uses its products may be put to, it is the user’s responsibility to determine suitability of use.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.