Cromar AlphaChem Line Marking Paint 700ml
- Suitable For: spot marking for contractors on roads, factory and warehousing floors etc as well as for grass applications.
- Area of use: INT & EXT
- Application Method: spray
- Time to full cure: 30 minutes
- Volume: 700ml
- Container Type: can
- Type: spray paint
- Colour: 4 colours
- Brand: Cromar
- Manufactuer: Cromar
- Box Size: 12
Cromar AlphaChem Line Marking Paint is a solvent based spray applied, line marking paint – quick drying (30 minutes) and semi permanent. Ideal for spot marking for contractors on roads, factory and warehousing floors etc., as well as for grass applications.
For more information on Cromer, please visit their website here.
For primers and cleaners, please click here.
Suitable for use on various substrates, will last at least 3 months under normal wear and tear.
Line Marking Paint is available in a range of colours, including; White, Red, Yellow and Blue.
APPLICATION
– Use in a well‐ventilated area.
– Shake can well before use for 2 to 3 minutes so that it rattles.
– Remove the cap and turn the can upside down.
– For hand use, point the can in the required direction, depress the nozzle with one finger on either side of the button. (Alternatively, the aerosol can be inserted into a line marking machine, then tighten and press the trigger to get a spray.)
– Do not allow the paint to dry in the nozzle. Clear by turning the can so it points upwards and press the nozzle for a few seconds until clear.
LIMITATIONS
– Do not apply in wet weather or if rain is impending.
– When applying on roads or car parks, allow to dry for 2 hours before trafficking.
– Do not use below 3°C or when humidity is over 90%.
– It is the user’s responsibility to ensure suitability for use.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.