illbruck FM330 Pro Foam Air Seal 750ml – Box of 12
£14.39 inc. VAT
£11.99 ex. VAT
- Product ID: 334348BOX
- Suitable For: adhesion to brick, block, stone, plaster and cementitious materials as well as wood, metal and a variety of plastics.
- Area of use: INT & EXT
- Time to full cure: 45 minutes
- Volume: 750ml
- Container Type: can
- Type: expanding foam
- Colour: white
- Brand: Illbruck
- Manufactuer: Illbruck
- Box Size: 12
illbruck FM330 is a one part, rapid, moisture-curing expanding polyurethane foam which is gun applied and has excellent elasticity, airtightness and acoustic properties. It has excellent adhesion to a full range of building substrates, such as brick, block, plaster, stone and cementitious materials as well as wood & metal.
BENEFITS
– A high-performance PU foam with excellent acoustic and airtight performance
– Airtight formulation – tested to EN 12114
– Elastic performance – up to 50% movement capability
– Can still be used at temperatures as low as -3°C
– Low post-expansion facilitates more accurate application depth
For all other illbruck products on our website, please click here.
For our full range of expanding foam, please click here.
For any further information you require on illbruck products, please visit their website here.
illbruck FM330 is ideal for airtight gap filling in general construction joints – including where movement is expected to occur.
It is suitable for applications such as airtight window and door perimeter joint seals, sealing floor to wall and wall to ceiling joints and pipe & service penetrations.
APPLICATION
– Shake the canister vigorously at 20 times. Remove the protective cap & screw the gun onto the canister.
– Invert can and direct nozzle into the gap, pressing gently on the trigger to establish the correct flow rate.
– Underfill joints to allow for post-application expansion of the foam. Fill to approximately 80-90% of the joint depth
– Applying a light spray of clean water between each layer before application
– When filling deep joints, apply in layers & wait for each layer to skin and partially cure before applying the next.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £3.56 inc. VAT
£2.97 ex. VAT
From:
From: £11.34 inc. VAT
£9.45 ex. VAT
From:
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £4.36 inc. VAT
£3.63 ex. VAT
£12.38 inc. VAT
£10.32 ex. VAT
£4.86 inc. VAT
£4.05 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT
£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.