Soudal Yellow – Contact Adhesive Spray 300ml

£2.86 inc. VAT
£2.38 ex. VAT

Checkout
  • Product ID: 132675
  • Suitable For: the bonding of paper, timber, glass, posters, etc.
  • Area of use: INT & EXT
  • Application Method: spray
  • Time to full cure: 15 - 20 mins
  • Volume: 300ml
  • Container Type: aerosol can
  • Type: adhesive
  • Colour: transparent
  • Brand: Soudal
  • Manufactuer: Soudal
  • Box Size: 1

 

Soudal Contact Adhesive Spray is a ready to use universal contact adhesive spray suitable for a wide range of substrates and surfaces.

 

Properties
– For temporary or permanent bond
– Ready to use and very user friendly
– Fast drying process.
– Good adhesion to many materials
– Fast hand tight bond.

 

Substrates
Nature: The to be bonded materials should be flat and well fitting as well as clean, dry and free of dust and grease.
Surface preparation: No pre-treatment required. Rough grinding of smooth surfaces improve the adhesion. A preliminary adhesion test on every surface is recommended. Contact Adhesive Spray can be applied to most surfaces, except PE, PP, PTFE.

 

 

For more in our range of adhesives, please click here, or for more products from Soudal, click here.

Alternatively, you can visit Soudals website by clicking here.

 

 

Soudal Contact Adhesive Spray is suitable for the bonding of paper, cardboard, photographs, posters, felt, textiles, cork, leather etc. to each other or to timber, concrete, glass and metals.

 

APPLICATION

Application method: For a PERMANENT BOND : Shake can well before use. When processing keep the aerosol can at all times upright and fully press the nozzle. Spray at a distance of ca. 5 à 10 cm of the object. Apply the adhesive evenly to both to be bonded surfaces. Spray the lanes over the entire material, preferably having a halfway overlap of the previous lane in order to have covered the whole surface with 2 layers. Two light coats (with overlap) give better results than one thick
coat. Wait at least 10 minutes (at 23°C and 50% R.H.) and join the two parts together. Then press firmly together.

When making connections, the strength and not the duration of the compression will determine the ultimate strength. After spraying, hold the can upside down and press the spray head until only propellant and no more product comes out to prevent clogging up of the spray can.

For a TEMPORARY/CORRECTABLE bond Shake can well before use. When processing keep the aerosol can at all times upright and fully press the nozzle. Apply adhesive only on the adhering surface, not on the surface to be adhered too. Spray at a distance of ca. 5 à 10 cm of the object. Apply the adhesive evenly to the surface. Spray the lanes over the entire material, preferably having a halfway overlap of the previous lane in order to have covered the whole surface with 2 layers. Wait at least 20 minutes (at 23°C and 50% R.H.) and join the two parts together. Next press firmly After spraying, hold the can upside down and press the spray head until only propellant and no more product comes out to prevent clogging up of the spray can.

 

LIMITATIONS

– Do not use in applications where continuous water immersion is possible.
– Not suitable for vinyl or other materials with a high content of plasticizers.

 

Reviews

There are no reviews yet.

Be the first to review “Soudal Yellow – Contact Adhesive Spray 300ml”

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10
From: £9.54 inc. VAT
£7.95 ex. VAT
From: £9.54 inc. VAT
£7.95 ex. VAT
From: £6.00 inc. VAT
£5.00 ex. VAT
From: £6.00 inc. VAT
£5.00 ex. VAT
From: £3.83 inc. VAT
£3.19 ex. VAT
From: £3.83 inc. VAT
£3.19 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £4.01 inc. VAT
£3.34 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £1.19 inc. VAT
£0.99 ex. VAT
From: £2.65 inc. VAT
£2.21 ex. VAT
From: £2.65 inc. VAT
£2.21 ex. VAT
From: £20.23 inc. VAT
£16.86 ex. VAT
From: £20.23 inc. VAT
£16.86 ex. VAT
From: £24.76 inc. VAT
£20.63 ex. VAT
From: £24.76 inc. VAT
£20.63 ex. VAT
£3.19 inc. VAT
£2.66 ex. VAT
£3.19 inc. VAT
£2.66 ex. VAT
£5.09 inc. VAT
£4.24 ex. VAT
£5.09 inc. VAT
£4.24 ex. VAT
£13.24 inc. VAT
£11.03 ex. VAT
£13.24 inc. VAT
£11.03 ex. VAT
£198.00 inc. VAT
£165.00 ex. VAT
£198.00 inc. VAT
£165.00 ex. VAT
£2.46 inc. VAT
£2.05 ex. VAT
  • From: £20.23 inc. VAT
    £16.86 ex. VAT
    From: £20.23 inc. VAT
    £16.86 ex. VAT
      Bond It Colour Enhancer is designed to enhance coloured concrete and block paving and protect from water penetration, oil or grease spillages and dirt/grime build-up. It will enhance the present colour and extend the lifespan of the treated surface. A ready-to-use, coloured solution for use on concrete, block paving, paving slabs, walling and roof tiles. Restores colour Reduces water penetration, staining and dirt/grime build-up UV stable formulation Helps inhibit organic growth Solvent-free formulation – low odour Facilitates easier cleaning Improves water r
  • From: £24.76 inc. VAT
    £20.63 ex. VAT
    From: £24.76 inc. VAT
    £20.63 ex. VAT
      Bond It Geo-Fix All Weather is a single component joint filling system for the simple and rapid pointing of paved areas with joints over 5mm. Ready-to-use, simple brush application. Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather.   Features & Benefits: - Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather - Can be used on joint widths of a minimum of 5 mm wide and a minimum of 15 mm deep. Semi‐rigid allowing for expansion and contraction of paving - GEO‐FIX All Weather is unaffected by w
  • £37.01 inc. VAT
    £30.84 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.
  • £70.80 inc. VAT
    £59.00 ex. VAT
    £70.80 inc. VAT
    £59.00 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.