- Sorry, this product cannot be purchased.
Soudal Mirror Fix 290ml
£7.81 inc. VAT
£6.51 ex. VAT
- Product ID: 132437
- Suitable For: bonding of mirrors onto most types of surfaces
- Area of use: INT
- Application Method: silicone gun
- Time to full cure: 24 hours
- Volume: 290ml
- Container Type: cartridge
- Type: adhesive
- Colour: white
- Brand: Soudal
- Manufactuer: Soudal
- Box Size: 1
Soudal Mirror Fix is a high strength, flexible adhesive and sealant designed for the bonding and sealing of mirrors. Used to bond mirrors to most building materials. Can also be used to seal around mirrors.
Properties
– Fast curing
– Primerless adhesion even on damp surfaces due to unique adhesion promoters.
– Stays elastic after curing and very sustainable
– No odour and does not contain solvents
– Does not contain isocyanates and no silicones
– No risk for staining on porous substrates (migration of plasticizer).
– Colourfast
Substrates
Substrates: all usual building substrates, treated wood, PVC, plastics
Nature: rigid, clean, dry, free of dust and grease.
Surface preparation: Porous surfaces in water loaded applications should be primed with Primer 150. Prepare non-porous surfaces with a Soudal activator or cleaner (see Technical Data Sheet). Mirror Fix has excellent adhesion on most substrates. Mirror Fix can also be used on natural stone. Not suitable for PE, PP, PTFE (eg Teflon®), bituminous substrates, copper or copper-containing materials such as bronze and brass. We recommend a preliminary adhesion and compatibility test on every surface.
For more in our range of adhesives, please click here, or for more products from Soudal, click here.
Alternatively, you can visit Soudals website by clicking here.
Soudal Mirror Fix is a direct bonding of mirrors with an acetone safe back onto most types of surfaces. Sealing of joints in mirror walls. Suitable for damp and uneven surfaces. on damp surfaces.
APPLICATION
Application method: With manual- or pneumatic caulking gun. Apply Mirror Fix with attached V-cut nozzle in vertical adhesive beads on the back of the mirror. Depending on the weight of the mirror an adhesive bead shall be applied every 10 to 20 cm. See also remarks.
Cleaning: With Fix ALL Cleaner immediately after use.
Finishing: With a soapy solution or Soudal Finishing Solution before skinning.
Repair: With the same material.
LIMITATIONS
– Due to the wide variety of types of mirrors, we strongly recommend preliminary compatibility tests.
– Due to the low initial tack, the mirrors need to be supported during the curing process until the adhesive has fully cured. The time required depends on the weight/size of the mirror, temperature, relative humidity and the amount of product used.
– In order to avoid possible problems due to condensation, the mirror manufacturers as well as Soudal recommend sufficient ventilation at the back of the mirror. As a guideline, an opening of 3 mm should be left between the surface and the mirror. This can be assured by the use of double sided mirror tape.
– We recommend this minimal ventilation opening of 3 mm to ensure correct curing of the adhesive/sealant. Full surface bonding is at own risk of the applicator.
– For larger mirrors always use the adhesive in combination with a high quality double-sided mirror tape.
– Mirrors that are fitted with a safety film at the back to avoid shattering must be pre-treated with an adhesion promoter. The use of Soudal Surface Activator will ensure the best bonding performance on this type of safety film. Without the use of Soudal Surface Activator the adhesive bond might be insufficient with the risk of an unsafe situation.
– When using different reactive joint sealants, the first joint sealant must be completely hardened before the next one is applied.
– Mirror Fix has a good UV resistance but can discolour under extreme conditions or after very long UV exposure.
– Discoloration due to chemicals, high temperatures, UV-radiation may occur. A change in colour does not affect the technical properties of the product.
– Mirror Fix can not be used as a glazing sealant.
– Do not use in applications where continuous water immersion is possible.
– Not suitable for bonding aquariums.
– Contact with bitumen, tar or other plasticizer releasing materials such as EPDM, neoprene, butyl, etc. is to be avoided since it can give rise to discolouration and loss of adhesion.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.