Hodgson Sealants Firestrip 60 – 15m x 20mm x 3mm
- Suitable For: securing semi-insulating and insulating glass in timber
- Area of use: INT
- Volume: 15m x 20mm x 3mm
- Type: sealing strip
- Colour: 2 colours
- Brand: Hodgson Sealants
- Manufactuer: Hodgson Sealants
- Box Size: 7
Hodgson Sealants Firestrip 60 is a 20mm x 3mm intumescent strip sealant that offers a 60-minute resistance to fire when utilized to install fire-rated glass into internal doors and timber screens.
Key Features
• Thoroughly tested and proven to endure 60 minutes of fire and smoke resistance in timber doors and screens.
• Holds BWF Certifire Scheme Certificate No. CF297, authorized for use in timber screens and doors, providing 60 minutes of fire resistance.
• Tested with semi-insulating and fully-insulating glasses, achieving 60:0 and 60:60 (Integrity:Insulation) ratings respectively.
• Highly cost-effective when compared to alternative rigid or semi-rigid fire-resistant materials.
• Recommended for use by FIRAS Accredited Glaziers.
• Remarkable high tack surface ensuring strong adhesion.
• Allows overcoating with paints and decorative wood stains.
• Non-toxic and safe for use.
For more in our range of fire protection, please click here. For application guns and tool, please click here.
For more information on Hodgson Sealants and their other products, you can visit their website here.
Hodgson Sealants Firestrip 60 is specifically designed for securing semi-insulating and insulating glass in timber fire doors or hardwood timber screens, utilizing hardwood beads. Important Note: The effectiveness of Firestrip 60 is contingent upon using appropriate fire-resistant glass and a suitable frame design. If you have any doubts, please reach out to Hodgson Technical Services for additional guidance and information.
APPLICATION
Surface Preparation: Ensure that all surfaces are clean, dry, and devoid of frost, grease, and loose materials.
Application: Establish a set of glazing beads to act as a rebate if the opening is not already rebated. Position pins or screws at a 45° angle. Apply Firestrip 60 along the rebate upstand at the top, using the edge of the backing paper along the rebate platform, ensuring the strip aligns with the sightline. For larger rebates, lifting the paper above the platform may be necessary to ensure Firestrip 60 reaches the sightline.
Repeat this process for the sides and bottom rebate. Remove the backing paper and ensure corner joints butt against each other without overlapping. Position setting blocks.
Center the glass within the frame on the setting blocks. Apply firm pressure around the glass’s edge to ensure it makes contact with the surface of Firestrip 60.
Apply Firestrip 60 to the glass in a manner similar to its application on the upstands, either by running the edge of the paper along the rebate platform or directly onto the beads. Remove the backing paper.
Press the beads against Firestrip 60, ensuring a solid connection. Secure the beads with pins or screws according to the installation’s design requirements. Position pins or screws at a 45° angle to pass under the glass. Trim any excess Firestrip® 60 above the sightline with a sharp knife.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.