Cromar AlphaChem Accelerator, Frostproofer & Rapid Hardener
- Suitable For: facilitating the production of high early strength concrete, cement render and mortar.
- Area of use: INT & EXT
- Volume: 5 LTR, 25 LTR
- Container Type: bottle
- Type: accelerator
- Colour: light grey
- Brand: Cromar
- Manufactuer: Cromar
- Box Size: 1
AlphaChem Accelerator, Frostproofer & Rapid Hardener is a heat‐generating accelerator for cement-based mixes. Its principal uses are to facilitate the production of high early strength concrete, cement render and mortar. It is suitable for use as an aid to cold weather working when the heat generated will offset the retarding effect of low temperatures.
It is based on calcium chloride and surfactants and is therefore not suitable for use in structures that are reinforced with steel. Neither should it be used in mortar in contact with wall tiles. It may be used in blockwork, render, solid construction brickwork, mortar, flooring and screeds. It is particularly effective when used in the construction of new flooring in conjunction with AlphaChem Concrete Hardener & Dustproofer as a surface treatment. This combination gives increased wear resistance and rapid commissioning.
For more information on Cromar, please visit their website here.
For our full list of grouts and adhesives, please click here. For primers and cleaners, please click here.
AlphaChem Accelerator, Frostproofer & Rapid Hardener’s principal uses are to facilitate the production of high early strength concrete, cement render and mortar. It is suitable for use as an aid to cold weather working when the heat generated will offset the retarding effect of low temperatures.
APPLICATION
– Mix with gauging water in proportions 2.5 litres Accelerator, Frostproofer & Hardener to 22.5 litres water up to 5 litres to 20 litres. Equivalent usage equates to 2.5 to 5 litres per 50kg of cement with an optimum rate of 20 litres per cubic metre of mix when producing large quantities.
– When working in cold weather, the following precautions must be taken: o Always cover aggregates and sand and ensure they are free from frost. o Ensure water is not frozen and contains no ice. If possible, in very cold weather, use warm water.
– Cover finished work to contain generated heat and keep covered for at least 48 hours. Keep the gauging water to a minimum and always use good concreting practice in accordance with current codes of practice.
LIMITATIONS
– As the manufacturer cannot know all the uses its products may be put to, it is the user’s responsibility to determine suitability of use.
– Read the label before use for health and safety information, important to read the safety data sheet for detailed information prior to using.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.