- Sorry, this product cannot be purchased.
Cromar Alpha Chem Gun Grade Expanding Foam 750ml
£4.97 inc. VAT
£4.14 ex. VAT
- Product ID: X5FGG/750
- Suitable For: adhesion and filling in cotruction and home projects
- Area of use: INT & EXT
- Application Method: foam gun
- Time to full cure: 30 mins
- Volume: 750ml
- Container Type: can
- Type: foam
- Colour: light yellow
- Brand: Cromar
- Manufactuer: Cromar
- Box Size: 1
Alpha Chem Gun Grade Expanding Foam is a user-friendly, single-component PU Expanding Foam, perfect for various applications in both construction and home enhancement projects. Designed to be used with foam applicator guns, it offers increased yield through expansion, along with simple application and the option for reuse.
Alpha Chem Gun Grade Expanding Foam exhibits remarkable adhesion and filling capabilities, coupled with exceptional thermal and acoustical insulation properties. It’s resistant to mold and water, and can be painted over. Notably, this product is environmentally friendly, devoid of any ozone-depleting propellant gases.
For more in our range of Foams, please click here. For more in our range from Cromar, click here.
Alternatively, to visit Cromar’s website, please click here.
Alpha Chem Hand Held Expanding Foam is suitable for:
- Addressing substantial, uneven, or challenging gaps, where the foam’s expansion ensures thorough cavity filling.
- Securing and insulating window and door frames.
- Affixing boards securely in place.
- Providing insulation within the areas between brickwork and cladding, encircling ductwork, and spanning through voids that accommodate pipes and cables.
- Serving as backing material for joints with minimal expansion requirements.
APPLICATION
- Ensure that all surfaces are clean, solid, dry, and devoid of dust, grease, or other impurities.
- The recommended can temperature is +20°C. Application is viable between +5°C and +30°C.
- Thoroughly shake the can before use.
- Attach the can to an applicator gun, being cautious not to overtighten.
- Enhance adhesion and expedite curing by moistening surfaces and the foam.
- For foam application, invert the can and activate the trigger. Control foam output using the trigger and adjustment screw on the rear of the gun. Maintain the can in an upside-down position throughout application.
- For Filling: Load the cavity halfway with foam, as expansion will ultimately fill the void.
- For Fixing: Secure door and window frames with wedges until complete curing occurs, approximately within 24 hours.
- After use, keep the gun connected to the foam can. To reuse, break the foam nib at the tip of the gun’s applicator nozzle, shake the can, and commence application.
- Alpha Chem Foam Cleaner is suitable for cleaning fresh foam, while cured foam can be cleaned mechanically.
- Proper disposal of all packaging is the user’s responsibility.
LIMITATIONS
- Store and transport the product in a vertical position.
- Shelf life may be reduced when stored above +25°C or below +5°C.
- Maintain the product at room temperature for a minimum of 12 hours before application.
- Exposing cured foam to ultraviolet light will cause discoloration.
- For optimal outcomes in outdoor applications, paint or coat the cured foam.
- Yield and curing time decrease in colder temperatures.
- The user assumes responsibility for verifying suitability for their intended use.
- Before usage, carefully review the label for essential health and safety information. It’s recommended to consult the Safety Data Sheet for comprehensive details.
1 review for Cromar Alpha Chem Gun Grade Expanding Foam 750ml
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
-
From: £1.51 inc. VAT
£1.26 ex. VAT -
-
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Clive Goudercourt (verified owner) –
Arrived really quickly and perfect for the job. Exactly as described and a great price too. Thanks