Cromar AlphaChem Integral Waterproofer
- Suitable For: reducing water absorption and making cement mixes less permeable.
- Area of use: INT & EXT
- Volume: 5 LTR, 25 LTR
- Container Type: bottle
- Type: waterproofer
- Colour: pink
- Brand: Cromar
- Manufactuer: Cromar
- Box Size: 1
AlphaChem Integral Waterproofer is a liquid admixture designed to reduce water absorption and make cement mixes less permeable.
It also improves the workability of the mortar. Integral Waterproofer is suitable for use in rendering finishes and pointing mortars.
It is also used in reconstructed stone and non-structural concrete members – particularly valuable in:‐
– Semi‐dry mixes.
– Internal and external rendering.
– Special finishes.
– Pebbledash and Harling
– Rough Cast.
– Stucco etc.
DOSAGE
– 1 litre per 50‐100kg cement.
For more information on Cromar, please visit their website here.
For the 5 litre version, please click here. For our other waterproofing and water resistant products, please click here.
USES
– Makes renders and mortars water‐resistant.
– Improves weathering properties.
– Reduced suction aids pebble dashing – larger areas covered easily.
– Surfaces stay cleaner longer.
– Better appearance after rain
– Less likelihood of efflorescence.
– Drying shrinkage, crazing and cracking reduced.
– Improved frost resistance.
– Greatly reduced capillary attraction. Directions
– Stir or shake well before use.
– Integral Waterproofer New is ready for use and is added to the mix at the selected dosage rate.
– Mix designs will depend on factors such as location and sand gradings. – Refer to local standards and codes of practice for guidance.
APPLICATION
– Stir or shake well before use.
– Integral Waterproofer New is ready for use and is added to the mix at the selected dosage rate.
– Mix designs will depend on factors such as location and sand gradings.
– Refer to local standards and codes of practice for guidance.
LIMITATIONS
– Do not pre mix with other admixtures.
– Do not use in structural concrete.
– Do not overmix.
– As the manufacturer cannot know all the uses its products may be put to, it is the user’s responsibility to determine suitability of use.
– Read the label prior to use for health and safety information, safety data sheet available on request.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
From: £4.56 inc. VAT
£3.80 ex. VAT
From: £4.56 inc. VAT
£3.80 ex. VAT -
-
-
£170.45 inc. VAT
£142.04 ex. VAT -
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.