- Sorry, this product cannot be purchased.
- Product ID: THREADLOCK10
- Suitable For: nuts, bolts, screws and threads
- Area of use: INT & EXT
- Application Method: bottle nozzle
- Time to full cure: 5-10 minutes
- Volume: 10 grams
- Container Type: bottle
- Type: adhesive
- Colour: blue
- Brand: Everbuild
- Manufactuer: Everbuild
- Box Size: 1
Everbuild Threadlock GP Blue is a medium strength, self curing adhesive for locking threads on most nuts, bolts and screws which may need to be disassembled. Thixotropic non-drip formula.
- Medium strength for easy disassembly if necessary.
- Gap filling to 0.25mm.
- Quick initial bond (5-10 minutes).
To shop our range of glues and adhesives, please click here. Or for more in our Everbuild range, click here.
Alternatively, you can visit Everbuild’s website by clicking here.
Everbuild Threadlock GP Blue can be used in many areas including hydraulic system bolts, gearboxes, countersunk screws and most construction equipment. Can be used on “as received” and oil contaminated threads/nuts.
APPLICATION
SHAKE WELL BEFORE USE. Surfaces must be clean (will tolerate a light oily film) and dry. Apply to both surfaces and assemble components. Wipe clean excess material. Allow to cure for 5-10 minutes before handling/light use. Full strength achieved in 6-8 hours. If on hands wash immediately after with warm soapy water and apply suitable moisturising cream to area. Avoid contact with broken or sensitive skin.
LIMITATIONS
- Do not put into service until full bond strength is achieved.
- Do not use on polycarbonate or other sensitive plastics.
- Do not use on plated or anodized surfaces. Always test a small inconspicuous area prior to full application.
- As the manufacturer cannot know all the uses its products may be put to, contact technical services for advice if in any doubt.
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.