Geocel 201 One Part Polymer Sealant – Box of 12
- Suitable For: expansion joints in building and construction
- Area of use: INT & EXT
- Application Method: silicone gun
- Volume: 380ml
- Container Type: cartridge
- Type: sealant
- Colour: 6 colours
- Brand: Geocel
- Manufactuer: Geocel
- Box Size: 12
Geocel 201 is one part sealant that has excellent adhesive and weathering properties and cures to a robust, flexible sealant.
– Excellent adhesion to both porous and nonporous surfaces.
– Large colour range available
– Joint movement capability of ±20%
– Easy to apply, one-component sealant
– No maintenance required
– Unaffected by extremes in climatic conditions
– Non-slump
– Over paintable (see painting guide on reverse)
For all other Geocel products on our website, please click here.
For any further information you may require on Geocel products, please visit their website here.
Ideal areas for sealing – Pre-cast Facing – Cladding panels – Wall tiles- Granite – Metal & Timber window frames – Masonry – Glazing Systems (specific systems not all).
JOINT DESIGN
For joints between 6mm-12mm wide (minimum should be 6mm) – a depth of 6mm is recommended.
For joints 12mm and above wide – a width to depth ratio of 2:1 should be used.
PREPARATION
To prepare the surface, you should ensure that they are clean, dry, sturdy and grease-free.
Do not apply if the surface is below 5°C as it is impossible to guarantee Geocel 201 at this temperature.
PRIMING
Geocel 201 exhibits excellent primer-less adhesion to most common construction substrates. Geocel recommends carrying out an adhesion test before commencement of any project.
BACK-UP MATERIAL
Closed-cell polyethene backer rod is recommended where a back-up material is required. Low tack polyethene tape should be used in joints too shallow to allow the use of the backer rod. Backer rod is available from Geocel.
CLEANING
The excess sealant may be cleaned off tools and nonporous surfaces, while in an uncured state.
PAINTING
Geocel 201 may be overpainted with flexible water-based paints.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.