Protecta FR Graphite – Various Sizes
- Suitable For: drywalls, masonry walls, concrete walls, concrete floors and composite floors
- Area of use: INT & EXT
- Application Method: barrel gun
- Time to full cure: 3-5 days
- Volume: 300ml, 310ml
- Container Type: foil, cartridge
- Type: SEALANT
- Colour: dark grey
- Brand: protecta
- Manufactuer: polyseam
- Box Size: 25
Protecta FR Graphite is a high specification formulation designed to prevent the spread of fire, smoke and gases through openings in fire-rated walls and floors. Protecta FR Graphite expands when subjected to fire and closes openings around penetrations when any combustible or low-temperature melting materials have burnt away.
Protecta FR Graphite is designed to fire seal complex services that traditional fire-rated mastics do not achieve, such as large plastic pipes. Protecta FR Graphite can be used with suitable filling material, i.e. stone wool or Protecta Backing material, to ensure correct width to depth ratio and reduce the sealant’s shrinking during curing. The minimum depth and maximum width of the joints are included in the installation instructions.
Thermal activation takes place at 150 °C when the material will expand (intumesce) to prevent the passage of fire and smoke for periods up to 4 hours.
For barrel guns, click here. For all our other fire and heat resistant sealants, click here.
We stock the full Protecta range on our website.
For all further information, please visit the Protecta website
– Faster application times and minimal material use due to its ability to achieve high fire ratings and single sided installations
– Classified for fire sealing all types of constructions such as drywalls, masonry walls, concrete walls, concrete floors and composite floors
– Classified for fire stopping of service penetrations in cross-laminated timber walls and floors
– Classified for fire sealing all types of building service penetrations such as cables, cable bundles, cable conduits, steel pipes, copper pipes, composite pipes, PVC pipes, PE pipes, ABS pipes, PP pipes and PEX pipe-in-pipes
– Classified with commonly used pipe insulations such as stone wool, glass wool, elastomeric and phenolic, both interrupted and continuous through the fire seal
– Classified for fire sealing against timber, steel and aluminium such as door and window frames
– Causes no deleterious effects on cPVC pipes like BlazeMaster, supported by mechanical testing evidence
– May be installed in drywalls with or without framing around the opening
– Very high sound insulation
– Air, smoke and gas tight, tested at 600 Pascal
– Low emissions – environmentally and user friendly
– Suitable for most surfaces, including concrete, masonry, steel, gypsum, glass, plastics and most non-porous surfaces
– Hardens quickly and tack free after 1 hour (the fire performance specification of the joint filler has been derived when the joint filler has been let to cure for a month)
– 18 months storage time (under correct conditions)
– 30 years working life
LIMITATIONS
Should not be used in permanently damp areas or in joints with excessive movement, joints at floor level or joints below the ground.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.