Sika Sikaflex Tank N 600ml – Box of 20
£361.58 inc. VAT
£301.32 ex. VAT
- Product ID: FPSKFLEXTKGY6BOX
- Suitable For: areas that require the storage, filling and handling of water polluting liquids
- Area of use: INT & EXT
- Application Method: barrel gun
- Volume: 600ml
- Container Type: foil
- Type: sealant
- Colour: concrete grey
- Brand: Sika
- Manufactuer: Sika
- Box Size: 20
Data Sheets
Sikaflex Tank N – Designed for use in areas used for the storage, and the filling and handling of water polluting liquids. eg. floor joints in petrol stations, joints in handling areas, storage tanks, containment bunds, and movement and connection joints in parking garages.
APPLICATION
The substrate must be clean, dry and free from oils, grease, etc. Grinding non-porous surfaces with a fine abrasive pad, may improve adhesion. Tank N’s joint sealing system is approved for application on uncoated, liquid proofed, precast concrete elements. It has a technical approval for use in storage, filling and handling facilities for water-polluting liquids.
APPLICATION METHOD / TOOLS
After preparation, insert a backing rod to the required depth and apply primer if necessary. Insert the foil pack barrel gun and extrude Tank N into the joint, making sure that it’s in full contact with the joint sides. It’s recommended to use masking tape on exact joint lines or where neat lines are needed.
LIMITATIONS
Sikaflex Tank N can be over-painted with most conventional facade paints, however, testing is advised.
Note: non-flexible paints may affect the elasticity of the sealant and cause the paint to crack.
▪ Colour variations may happen due to chemicals, high temperatures and UV-radiation. A change in colour however, is purely aesthetic and does not influence the performance or durability of the sealant.
▪ Do not use on natural stone, as a glass sealer, on bituminous substrates, natural or EPDM rubber, or on any building materials which might bleed oils, plasticizers or solvents.
▪ Do not use to seal joints in or around swimming pools.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
-
From: £61.68 inc. VAT
£51.40 ex. VAT -
-
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.