Bond It Roof Seal Liquid Membrane – 100% Waterproof Barrier
- Suitable For: waterproofing and protecting various surfaces, particularly roofs,
- Area of use: EXT
- Application Method: brush/roller/spatula/spray
- Time to full cure: 72 hours
- Volume: 5 LTR 20 LTR
- Container Type: tin
- Type: sealant
- Colour: 2 colours
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: 1
Bond It Roof Seal Liquid Membranel is a hybrid technology product designed for waterproofing and protecting various surfaces, particularly roofs, against climatic variations, UV radiation, and chemical exposure. This liquid membrane demonstrates several advantageous properties:
- High Elasticity: Seal It Liquid Membrane possesses a high degree of elasticity, enabling it to accommodate structural movements and changes in the substrate caused by temperature fluctuations and other external factors.
- Temperature Stability: The product maintains its flexibility and performance even under extreme temperature conditions. It remains pliable and functional at temperatures ranging from -50 degrees Celsius to +120 degrees Celsius.
- UV Radiation Resistance: Seal It Liquid Membrane is resilient to the degrading effects of UV radiation from the sun, which can cause materials to deteriorate over time.
- Chemical Attack Resistance: The membrane shows a strong resistance to external chemical exposure, safeguarding the underlying surface from potential damage caused by various chemicals.
- Ageing and Discoloration Resistance: Seal It Liquid Membrane is designed to resist ageing and discoloration, maintaining its appearance and performance over an extended period.
- Thermal Properties: In thermal performance tests, the membrane exhibits exceptional properties, outperforming traditional materials such as black bitumen by 36% when applied at just 0.8mm thickness. This could contribute to improved insulation and energy efficiency for the covered surfaces.
- Energy Cost Reduction: The product is reported to be 11.3% more efficient than solar reflective paint, which implies that it can contribute to reducing energy costs by helping to regulate temperature and improve energy efficiency.
Roof Seal Liquid Membranel is used in combination with other components, including a primer (necessary when applying over certain existing substrates), accelerator, and reinforcing mat where required. This combination of products creates a comprehensive system that offers an alternative to traditional bitumen-based and GRP (Glass Reinforced Plastic) waterproofing membranes. It is suitable for application on various types of roofs and can be used as a protective and waterproofing solution for existing roof substrates.
This technology and its properties make Roof Seal Liquid Membranel a versatile and advanced option for achieving effective waterproofing, protection, and energy efficiency for a range of surfaces, particularly roofs, in various climatic conditions.
For all other Bond-it products on our website, please click here. For our full range of roofing products, click here.
For any further information you may need on Bond-it, please visit their website here.
The Seal It Liquid Membrane offers a remarkable feature of primerless adhesion, making it an exceptional choice for various building and roofing surfaces. Its versatile nature allows it to adhere securely to a wide range of materials without the need for a separate primer. Some of the surfaces it can be applied to include:
- Metal: The liquid membrane adheres well to different types of metal surfaces, providing effective protection against water damage and weathering.
- Wood: It can be used on treated and untreated wood, offering a waterproofing solution for wooden surfaces.
- Brick and Stone: Seal It Liquid Membrane can create an impermeable barrier on brick and stone surfaces, guarding against water infiltration and degradation.
- Polyester and Glass: The membrane can bond to polyester and glass, making it suitable for various applications where these materials are involved.
- Lead and Bitumen Coating: It can be used on lead and bitumen coatings, extending the lifespan of these surfaces.
- Roof Tiles: Whether it’s concrete or clay tiles, the liquid membrane can help prevent water damage and enhance the longevity of the roof.
- Plastics and Polycarbonate: It adheres to plastic and polycarbonate surfaces, offering protection against water and weather-related deterioration.
- Concrete: Seal It Liquid Membrane provides an impermeable seal on concrete surfaces, safeguarding against moisture intrusion.
- Roofing Materials: It is suitable for a wide range of roofing materials, including flat roofs, pitched roofs (with a pitch less than 10 degrees), roof tiles, corrugated or plate roofing, zinc, steel, fibre-cement, and more.
- Chimney Stacks and Roof Lights: The membrane can be used to repair and protect chimney stacks, roof lights, and other vulnerable areas.
- Zinc Guttering and Down Pipes: It is effective for protecting and maintaining zinc guttering, down pipes, and ventilation ducts.
Seal It Liquid Membrane forms an impermeable seal that repels water damage and provides resistance to natural weathering elements such as rain, snow, and sunlight. This makes it an excellent choice for repairing and maintaining various roofing and building components, enhancing their durability and extending their lifespan. Its wide applicability and versatility make it a valuable solution for a range of construction and maintenance projects.
APPLICATION
- Preparation: Remove all excess packaging materials from inside the tin, including desiccant and protective films. It’s advisable to stir the coating thoroughly before use to ensure uniform consistency.
- Immediate Application: Once the container is opened and the product is exposed to the air, it will begin to cure. Therefore, it is recommended to apply the product immediately after opening to prevent premature curing.
- Full Tub Usage: It is recommended to use the entire contents of the tub during installation. Leaving the product exposed to air in the tin for an extended period could result in skinning over and lumpiness.
- Application Tools: Use various application tools depending on the surface and desired outcome. Recommended tools include brushes (longer bristle brushes for rough substrates), short pile rollers, trowels, spatulas, squeegees, or industrial spray equipment.
- Coating Application: Apply the coating evenly to the surface at a rate of approximately 1 square meter per 1 liter at a thickness of 1mm. Adjust the application rate based on the porosity and roughness of the substrate. Ensure a minimum thickness of 1mm. Some surfaces may require two coats. Apply the second coat 8-24 hours after the first coat, when the first coat is sufficiently dry to walk on.
- Flashing or Edging: It is recommended to extend the coating beyond the substrate to create a self-terminating flashing. Alternatively, you can use SEAL IT CRACKS & EDGING SEALER to seal edges.
- Caution: Be cautious when applying the coating in windy conditions, especially when using the spray method. Avoid contact with surfaces that do not require coating.
- Cleanup: If unwanted contact occurs on surfaces, the product can be removed before it cures using acetone, Bond It WHITE SPIRIT, or Bond It MULTI-WIPES.
- Compatibility Test: Before applying the product to the entire surface, it is recommended to treat a small discreet area (approximately 1 square meter) with the ROOF SEAL MEMBRANE. This helps identify any adverse reactions between the product and the substrate.
LIMITATIONS
- Temperature Considerations: Do not use the product when temperatures are expected to be less than 5 degrees Celsius in the next 24 hours, unless you are using it in conjunction with the SEAL IT ACCELERATOR. Refer to the relevant instructions for proper usage.
- Surface Compatibility: The product is not suitable for use on low surface energy plastics such as PE (Polyethylene), PP (Polypropylene), and PTFE (Polytetrafluoroethylene). Test adhesion on EPDM sheets in a small area before proceeding. Avoid using the product on surfaces that release oils or plasticizers.
- Damp Substrates: Applying the MEMBRANE onto damp substrates that cannot dry out from underneath can lead to blistering. Ensure that the substrate is dry before application.
- Minimum Thickness: It’s crucial to achieve the recommended minimum thickness during application. Failure to do so can result in cracks and structural issues in the coating.
- Walking on Roof Surfaces: The restored roof surfaces should only be walked on for maintenance purposes. This product is not designed as a wearing surface and is not anti-slip.
- Pedestrian Walkways and Decks: SEAL IT LIQUID MEMBRANE is not suitable for use as a pedestrian walkway, deck, or frequently trafficked area. If the area will have light and occasional foot traffic, you can add small chip aggregate to the coating to provide limited slip resistance.
- Atmospheric Moisture: The product may not cure properly in areas with low atmospheric moisture. Ensure proper environmental conditions for successful curing.
- Priming Bitumens and Roof Felts: It’s essential to thoroughly and completely prime bitumens, roof felts, and similar surfaces before applying the ROOF SEAL MEMBRANE. Failure to do so can lead to product failure.
4 reviews for Bond It Roof Seal Liquid Membrane – 100% Waterproof Barrier
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Heider H. (verified owner) –
Very good service
MOHAMMED VASEEM (verified owner) –
Very good service. Thanks
Raymond W. (verified owner) –
Excellent, will buy again
Tracey (verified owner) –
Initially had issues getting 20l but cannot fault the customer services team . They sorted the problem within a couple of hours and my order was fulfilled and delivered.