Bond It Superheroes – The One 310ml
- Product ID: BDGIST
- Suitable For: almost all sealing applications.
- Area of use: INT & EXT
- Application Method: silicone gun
- Time to full cure: 24 hours
- Volume: 310ml
- Container Type: cartridge
- Type: sealant
- Colour: 2 colours
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: 1
Data Sheets
Bond It The One is a low modulus neutral cure (LMN) silicone sealant designed to replace all other silicones. It will not react with natural stone or bleed into porous stone and also contains a powerful fungicide to prevent mould growth.
Developed for most sealing applications this product is ideal for use in sanitary, window frame, ducting, high temperature and natural stone applications. Can be used on metals, mirrors, natural stone, granite, travertine, marble, stone, PVCu, concrete, plaster and VSG glass.
Benefits:
– Shower in 1 hour.
– Ideal for natural stone.
– Safe on metals.
– Mould resistant for up to 10 years.
– Ideal for PVCu and glass. Tested for use with VSG glass.
– Non shrinking.
– Up to 220°C.
– Ideal for mirrors.
– Suitable for ducting.
For more in our range of sealants, please click here. For all tools and application guns, please click here.
For more information on Bond It, you can visit their website here.
Developed for most sealing applications, Bond It The One is ideal for use in sanitary, window frame, ducting, high temperature and natural stone applications. Can be used on metals, mirrors, natural stone, granite, travertine, marble, stone, PVCu, concrete, plaster and VSG glass.
APPLICATION
Apply using a standard sealant gun. Cut the tip of the cartridge, screw on nozzle and cut to an angle of 45o at desired sealant width. Tool the sealant using a SEALANT APPLICATOR TOOL within 10 minutes of application – do not use a wetted finger.
For bath surrounds: 1/2 fill bath with water to allow sealant to be applied at joint mid point. If necessary masking tape may be applied. If large gaps are to be filled, polythene foam, rod or tape should be used to provide support and minimise sealant wastage. Tool down within 5 minutes using a wet spatula. Wait until silicone has cured before emptying the bath of water. Any trims should be bedded into the silicone within 5 minutes.
LIMITATIONS
Not suitable for aquaria and permanent immersion i.e. swimming pools.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.