CM 200 PF Fast Cure
- Suitable For: sealing expansion joints
- Area of use: INT & EXT
- Application Method: barrel gun or straight pour
- Volume: 4.5 LTR
- Container Type: tin
- Type: 2 part sealant
- Brand: CM Sealants
- Manufactuer: CM Sealants
CM200 PF Fast Cure is a two-part sealant that is used for several sealing areas. Most commonly used for sealing expansion joints, due to the advantages of the CM 200 PF is can be used for sealing expansion joints in concrete paved areas, docks, container depots, industrial factories, warehousing petrol forecourts. CM200 PF can be cold applied, so ideal for small works, such as remedial re-sealing of joints.
Advantages
- High-performance good movement accommodation, tolerant of severe climatic conditions.
- Chemical Resistant to spillages of fuels, hydraulic fluids, synthetic and mineral oils, and dilute acids and alkalis.
- Hand pour or machine/sealant gun application to joint.
- Non-Toxic Sealant.
- ISO 9002 Quality Assured Firm -BS5212. 1990 Type N – ISO 11600-F-25LM
- High Adherence
- Cure Time 20 to 30 mins.
For more in our sealant range, click here.
For more information on CM sealants, you can visit their website here.
Most commonly used for sealing expansion joints, due to the advantages of the CM 200 PF is can be used for sealing expansion joints in concrete paved areas, docks, container depots, industrial factories, warehousing petrol forecourts.
Cure Time
The life of the tin is 20 to 30 minutes at 25C, this is affected, but the outside temperature and the sealant temperature. Final cure, when full working properties are developed, occurs within two days at 25C, although the sealant will normally bear traffic within 2 hours of application. Higher temperature will result in a faster cure time; low temperatures will result in longer cure time. Do not apply at temperatures below 4C.
Preparation
Ensure that the joint is clean, free from dust and dirt. The joint should also be dry; any contaminant should be removed, the previous sealant, if re-sealing is taking place, must all be removed. If you are backing the joint with backer foam strip, ensure the backer strip is bonded to the base of the joint and proceed to apply. Priming of the surface should be done once the joint is cleaned, the joint faces should be primed with the appropriate primer. CM Primer C is recommended.
CM 200 PF Mixing and Application
Open Pack B and empty the contents into Pack A – Stir for five minutes, preferably using a slow speed electric drill with a mixer paddle, the mix is one. Take care to avoid including excess air. Pour or gun apply immediately into the primed joint. Current practice requires that the sealant shall be poured to a level between 3mm (Summer) and 6mm (Winter) below the wearing concrete surface.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.