Cromar AlphaChem Contractors PVA
- Suitable For: priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications.
- Area of use: preferably INT
- Volume: 5kg, 25kg
- Container Type: bottle
- Type: pva
- Brand: Cromar
- Manufactuer: Cromar
- Box Size: 1
AlphaChem Contractor PVA is a multi‐purpose bonding agent, primer sealer, cement filler and plaster admixture that adheres to most common building and D.I.Y. materials except PVC and rubber.
Contractor PVA is ideal for priming unsound surfaces before plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc. and as a cement admixture.
NOTE – for areas subject to constant damp, use Cromar SBR Bond, which is water resistant.
BENEFITS
• Improves adhesion to most common building surfaces. • Improves flexibility of mortars and screeds.
For more information on Cromer, please visit their website here.
To shop alternative PVA bonding, please click here. Alternatively shop or full range of sealants here.
As a general purpose adhesive for wood, cork, paper, textiles etc. • As an admixture for mortar/screeds/renders. • As a bonding agent for screeds/renders to difficult substrates. • As a primer/sealer in tiling applications. • As an internal filler when mixed with wood shavings, plaster etc.
APPLICATION
– All surfaces must be clean, dry and free from grease.
– FOR GENERAL PRIMING – Dilute 3 parts water to 1 part CONTRACT PVA and apply by brush. Allow to dry.
– FOR A BONDING COAT – Use undiluted and apply by brush. Apply plaster or render while the bonding coat is still tacky.
– AS AN ADHESIVE – Use undiluted. Coat each face and press surfaces together. Large areas should be clamped for 24 hours.
– AS A CEMENT ADMIXTURE – Add 5litres CONTRACT PVA to 25 kg cement.
– AS A FILLER/PLASTER ADMIXTURE – Dilute 1 to 1 with water and add to mix in place of water.
– Clean tools and any excess CONTRACT PVA with clean, cold water.
LIMITATIONS
– Do not use in exterior applications or areas subject to constant damp. In these areas, use Cromar Alpha Chem SBR Bond.
– As the manufacturer cannot know all the uses its products may be put to, it is the user’s responsibility to determine suitability of use. If in doubt, please contact Technical Services department for advice. Safety Data available on request.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
From: £4.56 inc. VAT
£3.80 ex. VAT
From: £4.56 inc. VAT
£3.80 ex. VAT -
From: £84.82 inc. VAT
£70.68 ex. VAT -
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
Reviews
There are no reviews yet.