APPLICATION
SUBSTRATE PREPARATION
All surfaces must be dust free & dry. Substrates that are highly porous, such as new plaster should be primed first with a dilution of Caulk with water. Can be applied to damp surfaces.
APPLICATION METHOD / TOOLS
Cut the tip of the cartridge with a sharp blade, taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45 degrees with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. In addition, any excess sealant, etc., can be removed using a sponge and warm water. Furthermore, Everbuild Everflex 125 can be overpainted after 1 hour.
LIMITATIONS
– Not for use in conjunction with bitumen or asphalt.
– Do not attempt to abrade when cured.
– Do not paint until a surface skin has formed.
– For internal use only
– Should not be used in conditions of continuous immersion, below ground level, in areas of high abrasion (e.g. floor joints)
Note: this product is a flexible. Certain inferior quality paints (especially certain vinyl matts) have very little movement in the dry film.
Anonymous (verified owner) –
Julia . (verified owner) –
Tim M. (verified owner) –
Great product, but more than that a great seller – communicative and helpful. Will use again!