Everbuild Puraflex 40 310ml
- Suitable For: A wide number of sealing and bonding jobs in the construction and engineering markets.
- Area of use: INT & EXT
- Application Method: silicone gun
- Volume: 310ml
- Container Type: cartridge
- Type: sealant
- Colour: 3 colours
- Brand: Everbuild
- Manufactuer: Everbuild
- Box Size: 1
Everbuild Puraflex 40 is a one-part component, high modulus PU sealant and adhesive which adheres firmly to most substrates. Provides excellent mechanical resistance & resistance to most common chemicals. Furthermore, this product can be over-painted when cured.
Advantages
– Bonds to most building substrates, such as concrete, wood, metal, aluminium, polyester, glass, u PVC, stone, ceramics, etc
– Can be overpainted with gloss and emulsion.
– Good seawater resistance.
– You can paint over this product, once cured, with oil and latex paints.
In addition to the above, if you require further information on this product, you can visit the Everbuild website here.
This product is also available in a 600ml foil & can be viewed here.
For all other products in our Everbuild range, please click here.
– Sealing and bonding metal panels and trim.
– Expansion joint sealing in concrete panels and floor joint.
– A vast number of sealing and bonding jobs in the construction and engineering markets.
– Bonding in container fabrication.
– Heavy traffic floor joints such as those found in warehouses, garage floors, factory floors, sports arenas & shopping centres etc.
APPLICATION
SUBSTRATE PREPARATION FOR EVERBUILD PURAFLEX 40
Before application, please ensure all surfaces are clean, dry and dust-free before using Everbuild Puraflex 40. All old sealant and mastic joints should be removed before application. In addition to that, when using on glass, metal and aluminium, areas should be cleaned using a solvent cleaner before application for optimum adhesion. When using with solvents, always ensure adequate ventilation. Avoid heat, sparks and open flames. Observe and follow all precautions listed on the solvent container label. It is not recommended for application to surfaces that are below 5˚C as it is impossible to guarantee a dry, frost-free surface at these temperatures. Therefore the sealant will most likely fail. It is unlikely that priming will be required; however, concrete must be sealed using a Primer. After that, if you are in doubt, consult Technical Services.
PRIMER
On porous substrates like concrete use Sika Primer – 3N.
LIMITATIONS
– Not for use on substrates that could bleed solvents or plasticises.
– Do not use on bitumen or asphalt.
– Paint types vary so conduct a trial before full application. Some paints have low movement and can show surface cracking.
1 review for Everbuild Puraflex 40 310ml
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
William Gillan (verified owner) –