FOSROC Thioflex 600 Gun Grade – 2.5Litre
£41.98 inc. VAT
£34.98 ex. VAT
- Suitable For: heavily trafficked floor joints, sealing movement joints in building and civil engineering structures
- Area of use: INT & EXT
- Application Method: barrel gun
- Volume: 2.5 LTR
- Container Type: tin
- Type: sealant
- Brand: FOSROC
- Manufactuer: FOSROC
- Box Size: 1
FOSROC Thioflex 600 is available in gun and pouring grades. The gun grade is ideal for general application.
ADVANTAGES
– Meets key international standards
– Forms a robust, elastic, rubber-like seal
– Accommodates continuous and pronounced cyclic movement
For all other Fosroc products on our website, please click here.
For any further information you may nee on Fosroc products, please visit their website here.
Ideal for heavily trafficked floor joints, sealing movement joints in building and civil engineering structures, including superstructures, basements and subways.
APPLICATION
Joint preparation
The joint surfaces must be dry, clean and free of frost. Remove any dust by rigorous wire brushing, grinding or grit blasting. Also, all rust, scale and protective lacquers must be removed from metal surfaces. Also, any expansion joint filler must be checked to ensure it is tightly packed, and no gaps or voids exist at the base of the sealing slot before positioning a bond breaker.
Note: The use of a bond breaker is not required in expansion joints containing Hydrocell XL or Expandafoam cellular polyethylene expansion joint fillers.
Priming
Priming should be achieved by applying one thin coat, using a clean, dry brush, ensuring complete coverage, then applying sealant once the primer is tack-free. If left for 3 hours, the surfaces must be reprimed before applying the sealant. Iron and steel must be protected with an anti-corrosion primer before sealing.
Mixing
Mix thoroughly using a slow speed drill fitted with a mixing paddle for at least 5 minutes. Thoroughly mixing all contents, including material right at the bottom of the tin. Immediately after mixing, load the sealant into a barrel Gun using the Follower Plate, and apply to the joint.
3 reviews for FOSROC Thioflex 600 Gun Grade – 2.5Litre
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
From: £34.99 inc. VAT
£29.16 ex. VAT
From:
From:
-
£37.01 inc. VAT
£30.84 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£70.80 inc. VAT
£59.00 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
From:£3.83£1.19 inc. VAT£3.19£0.99 ex. VATArbosil HM is a One-part High Modulus Acetoxy Cure Silicone Sealant, which cures rapidly on exposure to moisture vapour to form a resilient elastic silicone rubber. This product contains a fungicide to make it resistant to fungus and mildew. Arbosil HM bonds well to acrylic, ceramic, metal, glass and laminate surfaces and will not discolour during its service life whilst maintaining good elasticity. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this p
DAVID HARLAND (verified owner) –
John (verified owner) –
Excellent service
John O. (verified owner) –
Excellent product, very quick delivery