Hodgson Sealants Firestrip 30 – 15m x 12mm x 3mm
- Suitable For: fire and smoke resistance for glazing
- Area of use: INT
- Volume: 15m x 12mm x 3mm
- Type: sealing strip
- Colour: 2 colours
- Brand: Hodgson Sealants
- Manufactuer: Hodgson Sealants
- Box Size: 10
Hodgson Sealants Firestrip 30 is an intumescent strip sealant measuring 12mm x 3mm, capable of offering 30 minutes of fire and smoke resistance when utilized for glazing various glass types in internal doors, as well as softwood or hardwood timber screens.
Key Features
• Rigorously tested to ensure 30 minutes of fire and smoke resistance in timber doors and screens.
• Holds BWF Certifire Scheme Certificate No. CF297, approved for use in timber screens and doors, offering a 30-minute fire resistance period.
• Extensively tested with an array of insulating and non-insulating glass types.
• Highly cost-effective when compared to alternative rigid or semi-rigid fire-resistant materials.
• Swift, clean, and simple application process.
• Remarkable high tack surface ensuring strong adhesion.
• Permits overcoating with paints and decorative wood stains.
• Non-toxic and safe to use.
For more in our range of fire protection, please click here. For application guns and tool, please click here.
For more information on Hodgson Sealants and their other products, you can visit their website here.
Hodgson Sealants Firestrip 30 is ideal for securing both insulating and non-insulating glass in timber fire doors and softwood or hardwood timber screens using hardwood beads, utilizing the Hodgson FG2 Glazing System.
Note: The efficacy of Firestrip® 30 relies on the application of fire-resistant glass and an appropriate frame design. If uncertain, please reach out to Hodgson Technical Services for additional guidance and information.
APPLICATION
Surface Preparation: Ensure all surfaces are thoroughly clean, dry, and devoid of frost, grease, or loose particles.
Application: Establish a secure set of glazing beads to serve as a rebate if the opening lacks one. Position pins or screws at a 45° angle. Apply Firestrip 30 along the rebate upstand at the top by running the edge of the backing paper along the rebate platform, ensuring the strip aligns with the sightline. For larger rebates, it may be necessary to lift the paper above the platform to ensure Firestrip 30 aligns with the sightline.
Repeat this process for the sides and bottom rebate. Remove the backing paper, ensuring corner joints butt against each other without overlapping. Set setting blocks in position. Align the glass centrally within the frame on the setting blocks. Apply firm pressure around the glass’s edge to ensure it makes contact with the surface of Firestrip 30.
Apply Firestrip 30 to the glass in a manner similar to the application on the upstands, either by running the edge of the paper along the rebate platform or directly onto the beads. Remove the backing paper. Press the beads against Firestrip 30, ensuring a solid connection. Secure the beads with pins or screws in accordance with the installation’s design requirements. Position pins or screws at a 45° angle to pass under the glass. Trim any excess Firestrip 30 above the sightline with a sharp knife.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From:
From:
-
From:£6.82£1.19 inc. VAT£5.68£0.99 ex. VATHodgsons Sealants Silfix U7 represents a high modulus silicone sealant and adhesive engineered with an acetoxy curing mechanism, tailored to meet the exacting standards of professional users. It is ideally suited for a wide range of applications, including those within the realms of sanitation and plumbing, across industrial, commercial, and domestic settings. This exceptional product is distinguished by its remarkable tooling properties and offers the vital characteristic of exceptional elasticity, ensuring resistance to shrinkage and cracking. Its versatility extends to strong adhe -
From:£6.82£1.19 inc. VAT£5.68£0.99 ex. VAT
From:£6.82£1.19 inc. VAT£5.68£0.99 ex. VATHodgson Sealants Silfix U7N is a specialized silicone sealant and adhesive designed for professional users, particularly in sanitary and plumbing applications. Here are some key features and applications of Silfix U7N: Low modulus and alkoxy cure: Silfix U7N is a low modulus silicone, which means it has high flexibility and can accommodate movement without cracking. The alkoxy cure mechanism releases alcohol during curing, resulting in a neutral cure silicone sealant. Exceptional tooling properties: The sealant is formulated with properties that make it easy to tool and shap
Reviews
There are no reviews yet.